ssd on the gemini x55

6mefistofel6 · Post time 2018-10-10 14:30:47

Good afternoon. After updating the BIOS on x55 I have problems with determining the ssd drive. It is not always determined when turned on. It seems that he can not get out of sleep. Determined from the second or more PC inclusions. Can I get a previous version of the BIOS or make any corrections to a new one?

beelink · Post time 2018-10-12 13:52:40

Hi
This BIOS version is tested by us and can be used normally. If you have problems after updating, please provide more detailed information about this problem, such as video or picture information, we will try our best to help you.

best regards

6mefistofel6 · Post time 2018-10-12 15:13:57

ssd not starting on first switch pc

6mefistofel6 · Post time 2018-10-12 15:14:19

6mefistofel6 · Post time 2018-10-12 15:15:41

ssd is not determined when you first turn on the PC

beelink · Post time 2018-10-13 10:43:38

6mefistofel6 replied at 2018-10-12 15:15
ssd is not determined when you first turn on the PC

hi

Have you updated the patch for the win10 system before? Microsoft has previously posted the wrong patch, which will cause the SSD hard disk to be damaged after the update, resulting in the inability to read the SSD hard disk.

6mefistofel6 · Post time 2018-10-14 04:24:51

Ssd is not determined only after the first power up, it immediately goes into the BIOS. After I turn off and turn on the computer, it is determined correctly in the BIOS. There are no problems when working in Windows. I use Windows LTSB. Install all updates. Can ssd not go out of sleep? Before turning on the power to the computer is served in about an hour.Do not tell me how to check the performance of ssd programmatically or separately? I cleaned contacts on ssd.

santisc · Post time 2018-10-18 18:13:53

Edited by santisc at 2018-10-18 18:23

beelink replied at 2018-10-12 13:52
Hi
This BIOS version is tested by us and can be used normally. If you have problems after updating, ...

Where is the download of that BIOS version?
Is it advisable to update the BIOS version?

I edit, I found it, I think it refers to this: http://www.bee-link.com/forum.ph ... hread&tid=42469
It is that I load very slow the pages in this forum and it is complicated to look for the information.

beelink · Post time 2018-10-19 09:16:01

santisc replied at 2018-10-18 18:13
Where is the download of that BIOS version?
Is it advisable to update the BIOS version?

hi
BIOS update file download link:
https://mega.nz/#!buxDgCYR!x3_Kk ... QR59LR-ZVXkzUfvMR_M

Since the page is a BIOS update tutorial, there are a lot of images, so when you load the page for the first time, it will be slower. When you open it for the second time, this problem will not occur. We will also optimize the page and enhance its speed.
Thank you for your comments and feedback
best regards