SER8 bad WLAN Performance

Marek_Beelink

Hello,

I received a new SER8 today and immediately installed the latest BIOS. Unfortunately, I noticed right away that the Wi-Fi connection speed is very slow. In the 5GHz network, I only reach a maximum of 50-70 Mbps, while the phone, which is right next to the Beelink, always manages over 200 Mbps. Sometimes the connection almost completely drops. It can't be due to the distance from the router, as it's less than 4 meters away.

Is there anything I can do?

Thank you very much.

tuiguang6

Hello there,
Here are some potential solutions:
1.Please make sure your WIFI signal is full.
2. Make sure that the distance between the PC and the router is less than 6 meters.
3. Please uninstall the wifi driver and then resatart the PC to see if it works.
4. Please right click the windows ---setting -troubleshooting ---other toubleshooters--- internet---run , let the PC diagnose the problem and solve it automatically.
5.Please update the driver.  Here is the driver source : [https://dr.bee-link.cn/?dir=](https://dr.bee-link.cn/?dir=) click the item model , then you can find the related driver.
6. Go to device manager , click the property of the Intel WiFi driver ---advanced--choose property 802 ax, value also choose 802 ax.  

7. Please clear the CMOS.  Please turn off the PC , unplug the power supply, and press the CMOS button (or poke the hole of CMOS with a pin) for about 10 seconds . Next, restart the PC after ten minutes. Here is the tutorial [ https://mega.nz/file/2nIRGaYI#M2 ... pfyHlqyjnn86TypZp2w]( https://mega.nz/file/2nIRGaYI#M2 ... pfyHlqyjnn86TypZp2w)

8.Please right click the windows--computer management--double click Services--①Wlan  auto config--start the service, ②WWAN Auto config ---start the service.

9.Please go to the windows terminal (admin) >  type in : sfc /scannow > then wait until finished.  

10.Please try this software  [https://mega.nz/file/X7hGVZwb#1t ... IEUByAVZoOnzhSf4-Pg](https://mega.nz/file/X7hGVZwb#1t ... IEUByAVZoOnzhSf4-Pg)