Gt king II bricked OS

hamid7stick

Hi. my box was only working with first connected TV!! with any other tv OS crashing after going to android home then box reboot. I tried 10 different TVs and HDMI cables.  it was working only with first tv also after trying different cables everytime..


last time I move it on travel in a hotel  and tried my chance  still same issue! I got angry and press  back panel reset button. I thought it will do reset factory!
but I saw android recovery page  which says use volum up down to select options but remote never works there!

now I tried all USB and SD flashing method.  watch 10 different youtube tutorials for different boxes of gt kink  I tried all ways!  with USB cable   software never detect hub  with SD method wont pass Beeling logo and just stuck

I tried windows 11  / windows 7    -  Amlogic USB sofware 3.1  3.2  ...  the only thing I didn't try was short connecting the board! to return recovery which was for pro box! so I couldn't do it on this one! as different board!..  Im very sad and angry! never could enjoy the box! which is expensive as well comparing formular Z boxes

SN A311D2AG40017 8G


also recovery menu does not available anymore!

gatos814

Look here :

https://4pda.to/forum/index.php? ... indpost&p=117305541

Maybe with translation....

GOOD LUCK!

hamid7stick

gatos814 replied at 2024-03-09 22:26
Look here :

https://4pda.to/forum/index.php? ... indpost&p=117305541

thanks for reply. I took a look and tried something but no success I think need to do something on hardware like short-circuit  to bring something back..  it doesn't have recovery anymore...

gatos814

Look ... since you have no recovery ... it's bad!
It will only come back alive with the short pins method as you said....
And those above in that Russian post are the 2 pins !!!
Take a good look and read what it says!
You need also a windows 10 pc...
It might work also and on windows 11 but i don't know...
And of course on windows 7...!
You probably must install the drivers of that ubtool properly!
I don't use winsows 11 and i don't really know!
So...
You must erase all past ubt from your computer and do and a manually erase of any Amlogic file if it needed!
Also clean registry with a tool like ccleaner or something ... do a restart and install from the beginning ... the Aml_Burn_Tool 3.2.0 ...
This time do exactly as that man in that video ... first :
https://www.youtube.com/watch?v=71YAIw7_-kg
and when you Disable the Driver Signature Enforcement at last ... install the ubt 3.2.0!
Use these 2 links for ubt & mother rom :
https://beelink.oss-cn-hongkong. ... V3_setup_V3.2.0.exe

https://beelink.oss-cn-hongkong. ... KING%20II/003R0.zip

GOOD LUCK!

Support-03

Hello there,

Please do the short-cut.
Please see the tutorial in the  attached

Support-03

Do the Short-circuit, then power on, and finally insert the USB. Select the USB port closest to the power supply for the box's USB port.

hamid7stick

thank you so much from you guys with guides from both finally I could make it :)