|
|
Hello there
I cannot make my Beelink ser6 max boot from Batocera v38 USB but it works on my friends Beelink ser5 pro and on my Asus pn50
I started a thread on the batocera channel and we get batocera working from internal nvme disk but not from usb so they told me to contact you because I already got it to work on PN50 and SER5 PRO so they think it must be a BIOS setting that is causing this
here is the link to Baticera v38 stable and v39 BETA
Batocera v38
Batocera v39 beta
I have tested 3 ways to write the image to USB but all fails with the SER6 MAX
1. sudo dd if=batoceraIMAGE of=/dev/sda bs=4M
2. Raspberry Pi Imager
3. BelenaEtcher
Both versions, v38 and v39 works with all the above methods on Beelink Ser5 PRO and Asus PN50 and directly from SER6 NvMe Internal Harddisk
Hope to hear from you soon
|
|
Post time 2024-01-06 01:13:20