Beelink SER5 with 2. SSD?

Oxtorne · 发表于 2023-10-30 02:31:23

I have a Beelink SER5 with AMD Ryzen 5 and would like to install my SSD drive from another PC with Windows 11 as a starting drive. However, I can't set anywhere in the BIOS whether it starts from the originally installed NVMe SSD or the additional SSD. Is there a way to not boot from the NVMe SSD?

tuiguang7 · 发表于 2023-10-30 11:30:31

hello, ser 5 supports nvme ssd, may I have a picture of the ssd you added?

Oxtorne · 发表于 2023-10-30 18:25:19

Hello, here is a picture of the SSD I want to boot from.
Excuse my English, I'll let Google translate.

Magister · 发表于 2023-10-31 01:53:12

I have a SER5 and I know I booted on my SSD by pressing F7 at boot and selecting it. I'm pretty sure there is a way in the BIOS to do it too.

Oxtorne · 发表于 2023-10-31 18:44:05

Hello! Even with F7 when starting I can only select the original nvme ssd and UEFI, but I can't select any other ssd.
Even in the BIOS I can only select the nvme, I've tried everything.
Then I will have to send the device back, unfortunately!

Magister · 发表于 2023-10-31 21:03:21

Disable in BIOS SecureBoot? FastBoot? Enable Legacy boot?

Oxtorne · 发表于 2023-10-31 22:10:15

Edited by Oxtorne at 2023-10-31 23:34

SecureBoot is disabled, FastBoot is disabled. Legacy boot is not enabled, I'll try that later when I'm back in the office.
Thanks!