Please select To the mobile version | Continue to access the desktop computer version
View: 390|Reply: 1

GTI8-B i5 powers on but no post

[Copy link]

1

Threads

1

Posts

15

Credits

Newbie

Rank: 1

Credits
15
Post time 2023-10-22 03:57:28 | Show all posts |Read mode
Edited by th3t1ck at 2023-10-22 07:31

Is there a way to unbrick my GTI8? I've tried removing all memory, ssd, used HDMI and display port but I still get no POST.  :(

Also tried clear cmos... no good
Reply

Use magic Report

0

Threads

46

Posts

301

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
301
Post time 2023-10-23 15:58:31 | Show all posts
We apologize for this problem, Don't worry, the PC has one-year warranty.
Could you please send us a picture of SN on the bottom of the PC and a picture of purchase record ? Let's do some troubleshooting. Here are some potential solutions:
Pls try the things below to see if that could work.
1.Please change another HDMI cable or power supply.
2.Please unplug the power supply and HDMI cable. Please try to hit the hole of "CLR CMOS" with a needle or a pin for about 5-10 seconds.A few minutes later, plug the power supply and HDMI cable, turn on the PC again.
3.There might be something wrong with the hard ware components.Please take out the SSD and RAM and then put them back , make sure they are installed properly.Also please clean the gold finger with a rubber.Here is the tutorial  https://www.youtube.com/watch?v=hEd_7nmWVOk  If it still doesn’t work, please try to replace SSD and RAM or put the SSD or RAM to other devices to test if they work.
4.And  pls try to take out one ram out, and then just leave one in the box to see if that machine could work, and the same way to test the other one , to see if that is ram issue.(if your ram is more than 8gb)
Hope it helps, have a nice day!
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Sign up

Points Rules

Quick Reply To Top Return to the list