Stand for GTR7 Pro // keep it cooler :-)

lightpixel

Hello GTR7 Pro users...

I´ve designed a vertical stand for the GTR7 (Pro)...
With my tests at the vray benchmark, I get 10 degrees cooler Ram and SSD temps...
it´s a simple 3d print part... will upload on thingiverse if some one interested.

gtr7 vertical stand

tuiguang13

Thanks for your sharing.

CNaranjo

Please, share it. I´m interested.

angelinajhonson

badiya ek no.,

JoeGasper

After receiving the free updated vented baseplate, I replaced the 4 baseplate screws with M2.5 standoff screws I had from Amazon B071DJKBNK

blork

Can you please share the file? I'd be up for getting one printed locally.

achimd1

JoeGasper replied at 2023-11-06 10:54
After receiving the free updated vented baseplate, I replaced the 4 baseplate screws with M2.5 stand ...

Hi,
how much mm is the length from the standoff screw?

Thank you for your feedback!

JoeGasper

Circled is what is shown in the photo above. (From US Amazon item: B071DJKBNK)

steve_usa

I added the same 4 brass standoffs after receiving a vented baseplate for my GTR7 Pro a few months ago.

It works very well, lowering temps and allows opening the bottom baseplate much more quickly.

hlub69

Please share.  I would like to print this too.  Thank you.