Poll for Stable or Unstable machines by BIOS number

adewes

Guys, try to lower your monitor resolution to Full HD (1920x1080) and check if the crashes and reboots stop. I did it and the system is very stable for a week here.
Obviously this is not an acceptable "solution" long term but if more people confirm this issue, this might be a very good clue for Beelink/AMD to fix this.

poka00br

Mine is a GTR7 Pro 7940HS (32GB RAM, 1TB) with V2.22.1287 showing in BIOS.

It is totally unstable, as the unit reboots every 15min or less. Display is currently 1920x1080 (59,94Hz).

Tullagh

My second GTR7 Pro arrived the other day with new BIOS V28, and I upgraded the older one to the same version.

Both are perfectly stable, though I've only tested them with 2K non-HDR monitors. The stability issues seem to be related to higher-end displays, at least for some people here. That's a concern for me, as I intend to eventually have dual HDR monitors attached to both machines. We'll see.

mistercode

I receveid the BIOS V28...

My monitors is ACER Predator X32FP 4K HDR 160hz... After 1h, is stable for the moment... I croise the fingers it continues...


EDIT : Reboot 1h20min, hey... I give one last chance with the new bottom with holes that I must receive in the next few days, otherwise I ask for a refund.

sepotvin

GTR7 Pro with BIOS V28 received one week ago. Stable so far both under Linux and Windows with a 4K@60Hz display. Only change was to add a second 2TB nvme ssd. No problem with both light and heavy loads (CPU and GPU).

Mr_Brolin

Looks like the fun and games have been (at least partially) motherboard issues according to this post.  https://forum.bee-link.com/forum ... page%3D1&page=3  

Wowa replied at 2023-09-04 21:46
What changes have been made so that newly sold models do not have this glitch related to unwanted  ...

Hello there,

We make  some changes on the motherboard.

CES86

Hi, how can we see the results without voting? I was thinking about buying GTR7 until last week, now I'm thinking about SER7 because the lot of problems seen with GTR7 here and on Internet...

What do you recommend me?

Thanks for your advice!

lightpixel

Iam in same situation... but it seems better not to buy the GTR 7 Pro ... seems to be hardware failure which beelink will be solve by a small additional part on the mainboard...

JoeGasper

Model: GTR7 Pro 7940HS V11
Build date: 2023-08-03
BIOS: V29 (GTRP01_P5C6V29)
SSD: 2x Samsung 990 Pro 2TB
RAM: 96GB with Mushkin Redline MRA5S560LKKD48GX2

No physical issues. Survives Cinebench 24 and CPU-Z stress.
Temperatures under stress: CPU 93C with no throttling; RAM 95C!; SSDs: 66C, GPU: 67C (don't have vented baseplate yet; temps are 25C-35C higher on subsystem components compared to a different vendor's mini 7940HS I have.
Video over: HDMI good. Display Port good.  (can't try dual)

BIOS issues: TDP is 45W. The BIOS setting for Balanced vs Performance mode only moves short (PBP) and long power (MTP) limits (54W and 65W). The system I have is a replacement, the original was 65W TDP. The other vendor I have is running much cooler and with TDP and APU STAPM at 54W, and PPT, PL1 (PBP), and PL2 (MTP) at 65.8W. Also, the Ryzen AI Inference Processor Unit (IPU) seems to be disabled (I have it on my other 7940HS mini).