Looks like replacement baseplates are being sent out

Mr_Brolin

Just had an email from Bee-Link with a tracking number saying they have sent out the replacemnet baseplate for me.


In case it is of use, my machine is the GTR7 Pro with the green case

GarethRossUK

mistercode replied at 2023-08-15 16:47
Hello everyone, I see that we are all looking for a solution... Little question, do you know where w ...

It's actually a few different parts built together to make the feet all the part numbers are in the video but I just purchased a set it wasn't the cheapst way but it was the most certain way at least in UK to buy the parts.

BGTXINGI 280pcs M2.5 Brass Male-Female/Female-Female Spacer Standoff Screw Nut Assortment Kit and stainless steel Screw Nut Set (Brass M2.5)

sourcing map 20 Pack 4mm ID Black Screw Thread Protectors Rubber End Caps Bolt Covers for Screw Bolt Furniture Pipe

Those rubber caps fit a little snug but do fit and work well, no slip no scratching and covers up the look.

Support-03

Hello there,

If you receive the tracking number, you will receive the plate in about 10 working days.

GarethRossUK

I got tracking numbers yesturday, I have a baseplate that I paid to get laser cut already and the benefits are far greater if you add extended feet to the base.


My memory while playing Ratchet & Clank maxed at 54c and 48c the CPU maxed at 79c and the GPU 69c that's with the game using 77% CPU and 99% GPU and 24GB of the available memory.

I have not bench tested it but under extreme gaming conditions 54c was the highest.

The feet that are included are only 2mm maybe 4mm but not very high.

The feet I used provide 11mm gap from the desk.

Mr_Brolin

I cheaped out slight;y.... but with a reason... 8-)

I raised the base using the stick on silicon rubber dots used to lift glass from table tops usually marketed on Amazon as "Self Adhesive Flat Bumper".

The ones I got are 6.2mm in height and have the advantage of dampening some slight noise and vibration I was getting at high fan speeds where the base was in direct contact with the desk.

GarethRossUK

Mr_Brolin replied at 2023-07-27 17:37
I cheaped out slight;y.... but with a reason... 8-)

I raised the base using the stick on silicon ru ...

what ever works, it's not cheaping out.

I purchased different screws and extenders and rubber caps to give height.

rubber pads / feet are a great way to do the same, as long as intake has a lot of room and not the few mm that Beelink designed it with and that it's flat and steady thats all great.

I don't know what the ram temps would be otherwise but I am very happy seeing 54c peak with Ratchet & Clank that released yesturday. I will have to test with the included origonal plate to see what those temperatures peak at.

wyeechen

I wonder how long it take to send out the plate. I requested it few days back, hope it doesn't take long

GarethRossUK

Got my baseplates today just in a padded envelope with some extra screws.

Great to have some spare screws.

I'd love if the stickers were available too but with it hidden away just store the origonal in the box.

I know from the laser cut base that I had already this will keep the temperatures down.

dedecou

GarethRossUK replied at 2023-07-31 21:08
Got my baseplates today just in a padded envelope with some extra screws.

Great to have some spare  ...

Can you do some before and after test? I am curious to see how much it will bring down the temperature.

GarethRossUK

dedecou replied at 2023-07-31 23:05
Can you do some before and after test? I am curious to see how much it will bring down the tempera ...

theres video on youtube that showed a baseplate with temperature i cant post it because it gets stuck in a moderation queue.

dedecou

GarethRossUK replied at 2023-08-01 02:20
theres video on youtube that showed a baseplate with temperature i cant post it because it gets st ...

I can't find it. Can't you post just the code of the youtube video that comes after (...)?watch=
?