请选择 进入手机版 | 继续访问电脑版
12
返回列表 发新帖
楼主: Samri

USB problems, especially USB-C

[复制链接]

1

Threads

5

Posts

23

Credits

Newbie

Rank: 1

Credits
23
发表于 2023-11-08 19:58:00 来自手机 | 显示全部楼层
to add to this the USB bus issue is a major setback for how I intended to use this miniPC.   Needed the typeC bandwidth.
回复 支持 反对

使用道具 举报

1

Threads

5

Posts

23

Credits

Newbie

Rank: 1

Credits
23
发表于 2023-11-08 20:56:55 | 显示全部楼层
I'm sorry to hijack this thread.   No understanding WHY but I went into the BIOS and just looked around in the BIOS trying to find anything that appeared to need to be turned on, made some change about USB Power management, and set the powermanage to Performance.    Saved exited.

Type C now works.  WTH.

Now on to the other issue of I/O and NVME on this unit.   I can transfer across wifi faster than the NVME can uncompress a file.   I can transfer almost 100MBs (not bps, BYTES) across wifi.   But the Crucial NVME can't get better than 50MBs when uncompressing a file that the same file can umcompress 500MBs on my other PC?   WIFI is faster than my NVME?   Something is really goofed up here....
回复 支持 反对

使用道具 举报

15

Threads

43

Posts

170

Credits

Member

Rank: 2

Credits
170
发表于 2023-11-08 22:18:48 | 显示全部楼层
Edited by linuxuser at 2023-11-08 22:24
Like so many other SER5 and GTR users on this forum, I'm having endless problems with the front side USB-C and USB 3.0 ports.

I did not test USB-C, but USB 3and USB 2 works here with Ubuntu and SER 6 Max 7735. USB 2 usess dongles für Keyboard and mouse. USB 3 is sometimes used to dopy data.

Linesin dmesg containing error:
  1. [    0.277500] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP5.RTL8], AE_NOT_FOUND (20221020/dswload2-162)
  2. [    0.277518] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-220)
  3. [    0.964421] RAS: Correctable Errors collector initialized.
  4. [    1.123951] pcie_mp2_amd: probe of 0000:e5:00.7 failed with error -95
复制代码


Lines containing invalid:

  1. [    0.370637] iommu: DMA domain TLB invalidation policy: lazy mode
  2. [    0.421778] amd_gpio AMDI0030:00: Invalid config param 0014
  3. [    0.421806] amd_gpio AMDI0030:00: Invalid config param 0014
  4. [    0.421827] amd_gpio AMDI0030:00: Invalid config param 0014
  5. [    0.421847] amd_gpio AMDI0030:00: Invalid config param 0014
  6. [    0.421867] amd_gpio AMDI0030:00: Invalid config param 0014
  7. [    0.421888] amd_gpio AMDI0030:00: Invalid config param 0014
  8. [    0.421908] amd_gpio AMDI0030:00: Invalid config param 0014
  9. [    0.421928] amd_gpio AMDI0030:00: Invalid config param 0014
  10. [    0.421948] amd_gpio AMDI0030:00: Invalid config param 0014
  11. [    0.421969] amd_gpio AMDI0030:00: Invalid config param 0014
  12. [    0.421989] amd_gpio AMDI0030:00: Invalid config param 0014
  13. [    1.139648] nvme nvme0: missing or invalid SUBNQN field.
复制代码


  1. $ lsusb -t
  2. /:  Bus 10.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 10000M
  3. /:  Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
  4. /:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 10000M
  5. /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
  6. /:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/0p, 5000M
  7. /:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
  8. /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
  9. /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/3p, 480M
  10.     |__ Port 3: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
  11.     |__ Port 3: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
  12. /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
  13. /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
  14.     |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
  15.     |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  16.     |__ Port 3: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
  17.     |__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  18.     |__ Port 4: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
  19.     |__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
复制代码


回复 支持 反对

使用道具 举报

15

Threads

43

Posts

170

Credits

Member

Rank: 2

Credits
170
发表于 2023-11-08 22:41:17 | 显示全部楼层
I searched now for an USB-C drive. Front USB3 works here, the 2 USB-4 drive at the back work too. But I could not test, what happens if I use more than 1 USB-C-port.
回复 支持 反对

使用道具 举报

0

Threads

1

Posts

24

Credits

Newbie

Rank: 1

Credits
24
发表于 2023-11-18 05:03:58 | 显示全部楼层
Bit late, but I got my SER5 5800h just a week ago. And I too have the USB-issues that the TS mentioned. EXACTLY the same. I used USB-viewer to check the USB-ports and there most of them are indicated as USB 3.1. But as soon as I attach disks to a port the 3.1 is replaced with 2.0. I'm not really good with pc's, so I can't reproduce the logs I saw and also can't think about the nature of the problem, but I DO know that power doesn't seem to be the issue. I attached drives directly to the ports, but also used powered USB3-hubs. That didn't help. Apart from that: when I installed Windows, the key didn't work. Beelink sent me a new one very quickly, so I thought everything would be ok. But now I have this usb-issue (a real problem for me, because I have 4 large external drives that have to be attached). And then there's a strange thing with the windows that I open. They minimize themselves within 5 seconds. Tried all sorts of things, but no luck. Experts on internet think it's a problem with the graphic drivers (which I updated of course). All in all I'm really disappointed. Had I known this before (my bad: didn't do much research) then I'd never had bought this thing. I'll give it another week and if it doesn't get better I reconnect the laptop that I used until last week. It's a bit slower, but I can use and trust it.
回复 支持 反对

使用道具 举报

12
返回列表 发新帖
您需要登录后才可以回帖 登录 | Sign up

本版积分规则

快速回复 返回顶部 返回列表