Ser5 PRO 5800H

derrellgore

I have had two things cause temperature get above 75 C.

1. copying files from another pc to Beelink via Wireless
2. When running Batocera and playing PS2 games.

In both instances Beelink froze.

I have found that is I remove bottom cover and set the unit on top of a 73mm USB fan this does very nicely temp stays below 60 C.

pepealba22

Hello, I'm not sure if this is the solution to your problem but you can try:
1.-Check that you have all the drives installed and updated
2.-Adjust the TDP from the BIOS
3.-Adjust the fan from the BIOS

I hope you find it useful and someone else can help you.

derrellgore

I actually played with BIOS before I read this...

Set to FULL definitely helped but got a little noisy.

I set TDP to 4.  It defaulted to 2.  This kept temp below 60C  even with bottom cover back on.

questionzoglin

I really do hope that helps, and that someone else is able to assist you.