Latest SER6 Pro BIOS

tokenquest · Post time 2023-03-05 17:02:34

fxnoob replied at 2023-03-05 16:48
I received this bios for 7735 machine from Support and worked, is the same PC. I got feedback from ...

I'm using the 1.13 bios version now. It has a lower idle temp but higher max temp because of the extra wattage. It is fine though, it throttles when it hits 83C.

fxnoob · Post time 2023-03-05 17:05:05

tokenquest replied at 2023-03-05 17:02
I'm using the 1.13 bios version now. It has a lower idle temp but higher max temp because of the e ...

I think I will change thermal compound to TG Kryonaut Extreme, I used it on my previous mini pc's and worked great. I don't know exactly what they used in this, but looking at temp spikes, I don't think is something top quality. This CPU's TJMAX is 95C so I'm fine at 92, they are only spikes... on 1.11 bios I had 88-92C permanently, it was very frustrating.

tokenquest · Post time 2023-03-05 17:18:17

fxnoob replied at 2023-03-05 17:05
I think I will change thermal compound to TG Kryonaut Extreme, I used it on my previous mini pc's ...

I have Arctic MX-4 that I will try later today. I will post my results.

tokenquest · Post time 2023-03-05 20:06:05

Edited by tokenquest at 2023-03-05 20:07

tokenquest replied at 2023-03-05 17:18
I have Arctic MX-4 that I will try later today. I will post my results.

Here are the results.

tokenquest · Post time 2023-03-05 20:31:46

Before CPU 36.3C-85.4C, After 34.6C-83.6C
Before GPU 36.5C-83.0C, After 34.8C-81.7C

Not really worth it to change thermal compound. Very minor improvement.

tokenquest · Post time 2023-03-05 20:44:31

Edited by tokenquest at 2023-03-06 01:46

fxnoob replied at 2023-03-05 17:05
I think I will change thermal compound to TG Kryonaut Extreme, I used it on my previous mini pc's ...

This is what it looks like in there. Note: There is a fan, it was removed before I took this picture.

tokenquest · Post time 2023-03-05 20:46:07

tokenquest replied at 2023-03-05 20:44
This is what it looks like in there.

Disassembled.

tokenquest · Post time 2023-03-05 20:47:18

tokenquest replied at 2023-03-05 20:46
Disassembled.

Main board.

tokenquest · Post time 2023-03-05 20:52:45

tokenquest replied at 2023-03-05 20:47
Main board.

After all the screws are removed. You have to disconnect the antennas from the WIFI card or the board will not come out. It will pull on the case wires.

tokenquest · Post time 2023-03-05 21:11:31

Added settings in BIOS Version 1.13 over stock BIOS version 1.09.