GTR6 Fan Noise Problem

ilkeratag

Support-03 replied at 2023-01-04 17:23
Helllo there,
Sorry for your trouble.
Pls contact us by ,Then I can send you the bios version to sol ...

my gtr6 fan doesn't cool enough, it's very quiet 25 minutes later, gtr 6 starts to hang, I turn it off and wait for it to cool down and it gets better but when it gets hot it repeats

nquinn

Beelink needs to better handle fans.

I understand that at high loads in these small machines noise might be inevitable.

But at idle or low loads, even when I saw the cpu only at 40c, the fans were quite audible/loud.
Additionally, at any hint of usage they cranked up.

If Beelink wants to focus on one thing to fix for their machines, it should be better fan/thermal management.

1. Build in smarter fan curves. At idle/low load fan should be at lowest setting until temp rises. Under initial/moderate load, fans should only ramp up a little bit to start. They seem to go from minimum to full blast all the time.
2. GTR6 with monitor off goes crazy. Fan cycles on/off/on/off all the time while just idling
3. Beelink should use more standard fan controllers that 3rd party software can read and control with apps like FanControl on Github.

DerekTM

I have installed latest BIOS V20.

But fan control section in the bios seems to be not working at all. It doesn't matter what values I set (temperature and fan speed), it's always works in auto mode.  Can Beelink team provide a BIOS with working fan control feature (the same way as for GTR5) ?

xiaogezhang

where did you get the latest BIOS V20? is there risk to brick the machine?

DerekTM

xiaogezhang replied at 2023-03-18 13:44
where did you get the latest BIOS V20? is there risk to brick the machine?

Can't insert link here. But I assume you can google for GTR6_4D_Windows_Bios_V20