查看: 1425|回复: 3

Stuck SER3 cover NEWBY

[复制链接]

1

Threads

1

Posts

15

Credits

Newbie

Rank: 1

Credits
15
发表于 2022-10-15 22:58:10 | 显示全部楼层 |阅读模式
Can anyone advise me on taking off the cover of a newly purchased SER3? I need to get inside to install HDD. Screws are out but seems tightly sealed. Don't want to return the thing if I can avoid it, but not very useful if I can't get cover off. Would like to keep banging on the thing to a minimum. Any tips appreciated. Help please.
回复

使用道具 举报

1

Threads

282

Posts

110K

Credits

Veteran

Rank: 8Rank: 8

Credits
14783
发表于 2022-10-16 10:23:06 | 显示全部楼层
Your answer is at 2m35s in... https://www.youtube.com/watch?v=OXTSMLVHT5I
回复 支持 反对

使用道具 举报

6

Threads

2432

Posts

7591

Credits

Super Moderator

Rank: 8Rank: 8

Credits
7591
发表于 2022-10-17 09:29:10 | 显示全部楼层
rmarion59 replied at 2022-10-16 10:23
Your answer is at 2m35s in... https://www.youtube.com/watch?v=OXTSMLVHT5I

Thank you for your sharing.  
回复 支持 反对

使用道具 举报

0

Threads

1

Posts

16

Credits

Newbie

Rank: 1

Credits
16
发表于 2022-11-26 03:51:00 | 显示全部楼层
On my Ser3, I used one of the screws for mounting the Ser3 on a wall, I screwed it into one of the holes for mounting and then using a pair of pliers I was able to pull the back off (ensure you remove the 4 screws on the back cover before doing this). Don't pull too hard on the back cover because of the short ribbon cable connecting the drive to the MB. There is a video that shows the ribbon cable. Once the cover starts to come off, you should see the ribbon cable easily by peering underneath the cover. My ribbon cable unplugged when I took my cover off. Once the cover was off, I took a metal file and carefully did a few swipes on the edges of the cover so it will come off easier next time. I installed my drive, reconnected the ribbon cable and screwed the cover back on.
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | Sign up

本版积分规则

快速回复 返回顶部 返回列表