U57 won't boot after BIOS update (VB1006_Universal.exe 2021-03-03)

farcel · Post time 2021-04-01 10:49:10

Edited by farcel at 2021-04-02 21:19

I've installed the BIOS update "VB1006_Universal.exe" from http://support.bee-link.com/drives.html?id=73 and installed it. After it's finished, I shutdown my U57. Then I tried rebooting my U57 and now it doesn't boot. After I press the power button, led turns on, I hear the fan but I don't see anything in the monitor (I tried my monitor with another PC and my monitor works fine). I tried changing the HDMI port, still nothing in monitor.

I suspect that my machine's BIOS is broken. Do you have a way to fix this problem ? (For example, you may share some key combinations in the keyboard, or you may to send me a file to write it to a USB drive to program BIOS from USB, etc.)

beelink · Post time 2021-04-02 14:38:08

farcel replied at 2021-04-02 06:27
I've also emailed about the problem to beelink support email address and they've suggested clearing ...

Hi there, when did you buy the machine?

beelink · Post time 2021-04-06 18:31:09

farcel replied at 2021-04-02 17:25
I bought the machine in September 2020.

Please contact the email support-pc@bee-link.com to inquire about maintenance

mick · Post time 2021-05-29 19:59:45

Hi,the same problem with U55...

Sniperdogdog · Post time 2022-09-15 18:45:21

Hello friends, I bought a used U57, it came without ram and ssd m2 2280 nvme. Turns on and off without image.
I installed dr3l 1.35v 1600., but without image hdmi1 or hdmi 2., when I turn on the starting fan, but on the second it turns off.
where to download the bios and then reinstall the bios.