[OS](2022) Manjaro ARM Linux- Dev - GS King X

ns2049 · 发表于 2022-03-07 20:44:51

spikerguy replied at 2021-01-23 08:26
Created an video tutorial for Flashing Manjaro ARM OS on GS KIng X on SD-Card and eMMC.

How to Flas ...

hi, spikerguy。I want to flash my GS king x into linux, and ask if the releases version of the gt king pro repository on github can be used for the device GS king x

spikerguy · 发表于 2022-03-11 17:43:51

ns2049 replied at 2022-03-07 20:44
hi, spikerguy。I want to flash my GS king x into linux, and ask if the releases version of the gt ...

Hello,

I will prepare an image for GS King X soon while user can use GT KIng Pro image and change the dtb file name in uEnv.ini to gskingx dtb.

That should work fine.

ns2049 · 发表于 2022-03-11 21:32:31

spikerguy replied at 2022-03-11 17:43
Hello,

I will prepare an image for GS King X soon while user can use GT KIng Pro image and change ...

ok, thanks for spending so much time on this project.

ns2049 · 发表于 2022-03-19 22:24:50

hi, spikerguy，I wrote the manjaro system into emmc, but I want to use the CoreELEC system on the sd card, what should I do? Also, how can I flash the android system again.

spikerguy · 发表于 2022-03-20 05:19:57

ns2049 replied at 2022-03-19 22:24
hi, spikerguy，I wrote the manjaro system into emmc, but I want to use the CoreELEC system on the sd ...

Hello

I have added GS King X to Manjaro ARM CI.
It is built here
https://github.com/manjaro-arm/gsking-x-images/releases

Dev Image are from unstable branch so use it for testing.

spikerguy · 发表于 2022-03-21 02:11:05

ns2049 replied at 2022-03-19 22:24
hi, spikerguy，I wrote the manjaro system into emmc, but I want to use the CoreELEC system on the sd ...

You can follow the flashing guide of beelink to re-flash Android on emmc.

You can use CoreElec on sd card with Manjaro on emmc, only if you use latest image.

ns2049 · 发表于 2022-03-21 14:20:33

spikerguy replied at 2022-03-21 02:11
You can follow the flashing guide of beelink to re-flash Android on emmc.

You can use CoreElec on ...

Hello, I have flashed the new manjaro system into the SD card, and flashed the android on emmc. Now start Android first and then switch the system to manjrao. It seems that the new system is working normally. However, I noticed a problem here, after the manjaro system is shut down, the skull blue eye light cannot be turned off, and the fan keeps spinning. Finally, how to flash the new manjaro into emmc, or use the old method?

spikerguy · 发表于 2022-03-29 06:43:58

Edited by spikerguy at 2022-03-29 06:46

Yes showdown and reboot seem to have some problem.
To flash it on emmc you just have to run the install-to-eMMC.script which is located in /boot/

Run this script as root or sudo.
Make sure the time is correct before running this script.

After the script is run successfully then reboot the device 2 times with sd card inserted.

After this just shutdown and remove sd card and try to boot. Hopefully it should boot from emmc.

Good luck.

ns2049 · 发表于 2022-03-30 17:02:01

spikerguy replied at 2022-03-29 06:43
Yes showdown and reboot seem to have some problem.
To flash it on emmc you just have to run the inst ...

Thank you.
I also have a puzzle about how to keep the user configuration updated to releases Dev 20220328, which is now installed with releases Dev 20220319.

spikerguy · 发表于 2022-04-03 09:35:03

Hello,
You can use pacman command or pamac app to update all the packages.

Tutorial can be found here.
https://wiki.manjaro.org/index.php?title=Pamac