CoreELEC support : working !

broleke · 发表于 2020-06-17 15:30:58

I created a thread on the CoreELEC forum regarding the GS King X support and experience.
You can find it here : https://discourse.coreelec.org/t/s922x-h-bee-link-gs-king-x/11634.

Briefly, CoreELEC-9.2.3, the last stable version, works great on this box !
The HDD storage is available directly and everything is recognized and working out of the box.

The DTB file to use is currently the revA gtking one.

broleke · 发表于 2020-07-01 02:26:41

Did you switch your box to CoreELEC ? everything works like a charm with version 9.2.3 (I'm using firmware 904P0_wol).

broleke · 发表于 2020-06-17 23:09:16

How can you switch to CoreELEC ?
Download the 9.2.3 ‘ng’ image, flash it on a SD-card with Rufus (or any other software you are comfortable with). Then copy the DTB file with GT king revA name from the device_tree into the root folder of the SD-card afterwards ; simply rename it to dtb.img.
Then, with the box powered-off and the cable unplugged, put the SD-card, use a toothpick to push an internal switch (there is a small hole in the bottom of the chassis, next to the output ports). When it clicks, put the cable power and wait until the CoreELEC screen appears.

spikerguy · 发表于 2020-06-18 15:48:45

Thanks for sharing this.

I will try this over the weekend.

Cheers.