HELP!!!!....I go to the trouble of buying a cable....I followed instructions ....No Device appears in the DEVICE ID of the burner or ANY information... the Stop button is just selected but does nothing....Refresh does nothing. My remote will not work..Now, what Beelink?
After TWO erase 0x00101004 bootloader/loweper/identify/error result
1) Plug the hub in with Power AND USB simultaneously. You will get the GREEN lights not the Red ones
2) If it does not work the first time you need to do it again until the device id comes up.
3) Pre-install - Import the firmware image first.
4) 5 and 6 are the same thing on the planet so I don't know why they are different in China. PRESS the stop button on unplugging.
Oh, yha....its burning SUCCESSFUL not SUCCESSFULLY. The latter implies it is still going on when it is actually finished. Oh my God. Like Before YOU close the tool....
Post time 2020-05-28 06:52:02
Post time 2020-05-28 18:50:57
