Internet speed

vjeko_os · Post time 2020-05-19 18:11:13

i installed new update 2 days ago and ever since my internet speed is extremly slow. i connect box with lan cable.before update speed was 60mbps and after i install update speed is onli 9mbps! can i delete new update and use my box without that new update?

beelink · Post time 2020-05-21 18:30:13

Hello，We really want to solve your problem, can you tell me, this problem appears after updating the firmware to 910P0? Has this problem occurred on both Ethernet and WIFI networks?

vjeko_os · Post time 2020-05-24 03:14:00

Yes 910P0_wol is firmware.no only on ethernet

beelink · Post time 2020-05-25 13:47:20

vjeko_os replied at 2020-05-24 03:14
Yes 910P0_wol is firmware.no only on ethernet

Hi，
In the 910P0 firmware update, we did not modify the network link, so usually this will not happen, you can re-burn the firmware, after re-burning to check whether it can be used normally.

vjeko_os · Post time 2020-05-26 03:32:22

How to re-burn firmware? And witch firmware to download?

beelink · Post time 2020-05-26 18:59:08

vjeko_os replied at 2020-05-26 03:32
How to re-burn firmware? And witch firmware to download?

Please check the link below and follow the burning guide in the link to burn the firmware in the link

http://bee-link.com/forum.php?mo ... &extra=page%3D1

gtkingpro.ac2n · Post time 2020-05-29 23:34:50

I think I have the same problem with the download speed wired in RJ45, I also noticed that when I start the box and I arrive on the home launcher, I have a black screen that appears and then everything comes back normal. .
Another small detail I carried out an OTA update and at the end of the process I had a message like what the update was already installed, strange ..
In addition I had a problem with the dual-boot on my TF card, I had to reflash the card and especially strange thing I can only boot Coreelec with the old DTB version which normally is intended for GT-King … When I use the DTB for GT-King Pro I have a black screen or a screen all weird, striated but nothing readable ..

gtkingpro.ac2n · Post time 2020-06-08 15:42:43

Edited by gtkingpro.ac2n at 2020-06-08 15:44

Hi, so I re-flash 910P0 on my gt-king pro but this time with my computer and no more problem with internet speed..
Problem solved for me ...

However Coreelec can only boot if I use the old DTB version (* .rev_a.dtb), still impossible to use the one normally provided for the gt-king pro like CoreeIec team said to me.. I think the concern is that the DTB version gt-king pro was done with the processor at 2.2Ghz and that finally as beelink had to retrograde the proc. at 1.8Ghz we must therefore use the version * .rev_a.dtb to be able to boot on Coreelec .. but it works ...