Beelink GT1 106_MO Firmware Discussion Thread

khalid

Beelink need to address.. Kodi/SPMC crash when AMCOCED enable

as you know Kodi yet full support amlogic S912...

mamil_km

Do you think, will be ?

sgh57

beelink is the best it is my first experience with beelink thanks to all

beelink

v8_ute replied at 2016-10-26 12:58
Beelink,
I'm still getting the "Unfortunately, Kodi has stopped" error. Also you didn't reply to my  ...

Hello, it is work after disable "amcodec", please check.

khalid

beelink replied at 2016-10-26 16:46
Hello, it is work after disable "amcodec", please check.

yessssssss

onurhonor

beelink replied at 2016-10-26 16:46
Hello, it is work after disable "amcodec", please check.

Hello,

Unfortunately I have terrible ghosting effect which makes picture unwatchable while I use Kodi and MX Player with HW mode. With HW+ and SW modes picture is good but there is no sound.

Are you aware this problem and do you have any solution.

Many thanks,

khalid

onurhonor replied at 2016-10-26 16:58
Hello,

Unfortunately I have terrible ghosting effect which makes picture unwatchable while I use  ...

can you try with VLC

onurhonor

khalid replied at 2016-10-26 17:06
can you try with VLC

Unfortunately I cannot get passthrough multi channel sound output with VLC.

gor

Much much better, maybe you should slightly lower clock speed processor to the unit was colder, because when it had a demanding job the CPU temperature rises above 60 iven 65 degrees Celsius 1.4 or iven 1.3 Ghz, will not reduce device performance significantly what I've read about the possibilities of processors...
Else about Kody,codecs and streaming does not affect me particularly, this I will not comment on ...

v8_ute

beelink replied at 2016-10-26 16:46
Hello, it is work after disable "amcodec", please check.

Yes but if I disable "amcodec" then I cant watch any h.265/HEVC 10 bit videos in Kodi.