|
|
Edited by Phant0m`` at 2020-01-02 01:08
Glossary
----------------------------
| HwID | Match Partial Serial Number | * First Four Digits of the Serial Number, found underneath of the unit.
| Based-On | Use this information to determine if you can apply SD Card firmware update package or you
required to use USB firmware package. If firmware package build is 708N0, and Based-On shows 707N0.
However you have 706N0 or lower Build installed, then you must use FOTA upgrading or you must use USB firmware package instead.
----------------------------
Latest Beelink LightHome Crashing & Weather Widget patch
Notes: Apply this everytime you upgrade firmware. There's patch for both GT1 Standard, and Ultimate Editions.
Patch for both Android versions, Android 6 and one for Android 7
********* Official Beelink forum post: http://www.bee-link.com/forum.ph ... 48302&fromuid=18779
Firmware Packages ( HwID: S912 & G912 w/(QCA9377 or LTM8830) Wireless | Upgrades Firmware Builds ???N0 )
*****************
Beelink GT1 Standard & Ultimate Editions
Build: 708N0 | Released on: March 13th, 2018
Based-On: GT1_705NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. The system has been improved already.
2. You can see a new Beelink File manager.
3. RGB has been added to this firmware.
4. You can get into the recover mode by pressing the reset button.
5. You can get the permissions for unroot firmware now.
6. The problem that the pictures are enlarged randomly has been solved.
7. You can get into the landscape mode freely.
8. The shut down popup has been removed for popular demands.
9. The SuperSu can't be installed for safe use.
10. We updated the FOTA apk for you.
11. The third-party apps can get the read permessions now.
12. The output frame rate can be compatible with the video samples now.
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=34862
---
Beelink GT1 Standard & Ultimate Editions
Build: 707N0 | Released on: November 9th, 2017
Based-On: GT1_706NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: N/A
EPROM Firmware: Yes
Release Notes:
1. The Ethernet MAC address can be shown in setting.
2. Some repeated options have been cleared already.
3. The problem that you get a black screen when you restart this device has been solved.
4. We have solved the problem that the input method gets crash when you press the 1/a button.
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=27104
---
Beelink GT1 Standard & Ultimate Editions
Build: 706N0 | Released on: N/A
Based-On: N/A
Android Version: N/A
OTA (Over-The-Air) Released: N/A
SD Card Upgrading: N/A
EPROM Firmware: N/A
Release Notes:
N/A
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=27079
---
Beelink GT1 Standard & Ultimate Editions
Build: 705N0 | Released on: November 1st, 2017
Based-On: GT1_704NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: N/A
EPROM Firmware: Yes
Release Notes:
1. The Ethernet MAC address can be shown in setting.
2. Some repeated options have been cleared already.
3. Improve the black screen problem when you resart this device.
4. The problem that the UI gets a crash when you press the 1/a button ( input method button ).
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=27079
---
Beelink GT1 Standard & Ultimate Editions
Build: 704N0 | Released on: September 30th, 2017
Based-On: GT1_703NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Application of vertical screen shows full.
2. Integrate AurtoReboot.apk.
3. On the main interface, please continuously press the Key 8 on remote three times to enable AutoReboot.apk.
4. There is no icon of AutoReboot.apk in APP List.
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=22818
---
Beelink GT1 Standard & Ultimate Editions
Build: 703N0 | Released on: August 17th, 2019
Based-On: GT1_702NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Improve the problem of "the setting interface is opended slowly".
2. Improved the problem of "the bluetooth can't be connected with the Android smart phone".
3. Improved the problem of "the other button is valid when you have a long press on the Menu button under the home inerface".
4. Supports the AirPlayer IOS 10.
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=13895
---
Beelink GT1 Standard & Ultimate Editions
Build: 702N0 | Released on: June 23rd, 2017
Based-On: No
Android Version: 7.1.1
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Support remote with 12/31/34 keys.
2. Static and dynamic Beelink logo.
3. LED light can be turn on and turn off.
4. Support install APP which is not from Google Play.
5. Default cancel validation application.
6. Default open WiFi.
7. Bluetooth keyboard is in accordance with model.
8. Modify dialog string to adapt with BOX product.
9. Default support 5G WIFI for all country.
10. Remove the obvious invalid-program in system.
11. Add Google package.
12. Open Root.
13. Add Light Home UI and WhatsFish HD.
14. Remove QODI immersion when first start up.
15. Modify the ROM to show theoretical value.
16. Support FOTA online upgrade.
17. Support HID device.
18. Support NTFS/CIFS files system.
19. Remove some unnecessary APP.
20. Remove Dolby&DTS option in the Setting.
21. Support DHCP KEY 1.4 TX.
22. Support some flying squirrel and joystick Mele F10/Hausbell_Mmini_i8/Rii_Mini_H7/XBOX/PS3.
23. SNTP (Synchronization network time server)
Official Link: http://www.bee-link.com/forum.php?mod=viewthread&tid=13002
---
|
|
Post time 2019-12-26 05:26:15
Post time 2021-02-09 02:28:18
Author.gif)
