View: 4407|Reply: 2

I bought GT King Pro. Arm Cortex A73 should read 2208 GHz. but actually has 1,7G

[Copy link]

1

Threads

2

Posts

47

Credits

Newbie

Rank: 1

Credits
47
Post time 2019-11-29 15:08:36 | Show all posts |Read mode
I bought GT King Pro.
Arm Cortex A73 should read 2208 GHz. but actually has 1,7Ghz.
HI, How I can get restore the firmware for frequency 2,2 Ghz ?
Reply

Use magic Report

0

Threads

3

Posts

24

Credits

Newbie

Rank: 1

Credits
24
Post time 2019-12-22 00:49:50 | Show all posts
Merhaba bende aliexpres'ten satın aldım aynı sorun bende, de  var bu bizimle, mi alakalı yoksa satıcı ile, mi alakalı bir sorun.
satıcı ile alakalı, ise bu sorunu nasıl çözeriz. bu konuda Bee-link bize net bir bilgi vere bilir, mi ?
Lütfen Bu konuda yardımcı olur musunuz bee-link ?
Reply Support Not support

Use magic Report

1

Threads

5

Posts

159

Credits

Member

Rank: 2

Credits
159
Post time 2019-12-24 21:47:45 | Show all posts
Edited by MaryAnn at 2019-12-24 21:55

Contact Beelink.
They are offering to give customers the firmware to overclock the cpu back to 2.2GHz.
The reason they went back to 1.7GHz was because the system became unstable at 2.2GHz.
Unless you really want to go to 2.2GHz I would advise you leave it at 1.7GHz.

I am in the same position. I contacted Beelink & that's the reason I know about it.
It seems they are using two Cpu revisions. There is Rev A & rev B.
They flatly denied it at first but then admitted the had two Cpu's & that they had changed the firmware because it was causing problems.
None of the adverts tell you its 1.7GHz which is a poor move from Beelink.
Some people bought the Beelink GT King & found they were running at 2.2GHz. The Beelink GT King machines were supposed to be runninmg at 1.7GHz while the Beelink GT King Pro was supposed to be at 2.2GHz.


Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Sign up

Points Rules

Quick Reply To Top Return to the list