Edit: Bt3-x internal hdd connect problem

kaiohoh · 发表于 2019-11-20 22:17:38

Edited by kaiohoh at 2019-11-22 22:40

Won't boot with hdd connected
=====================================================

I recently bought tis beelink bt3x. I powered on this machine, follow the setups and install it.
It works just fine...

Afterward, i installed even more things in it, in the process rebooting it a couple of times.

It stills works as it should be...

After that I tried 2 times to put in 2 different 1tb hdd in it.
And suddenly it wont boot anymore, but it detects the hdd in the bios.
and when I disconnect them, the thing boots just fine

Can someone help me solve this problem? Thank you

==================================================
EDIT: update concerning this hdd problem

i let the machine running overnight and the next morning it is in windows.

But immediately I encounterthe next problem. the hdd is also detected by windows, but I can't access it.
In dics manageement in windows, it gives me the somekind of virtualDisk Manager IO device error when I tried to create/format/delete a partition

However, when I attach the same hdd through usb, it doesn't give me these issues.

Can someone help me solve this problem? Thank you

JayceOoi · 发表于 2019-11-21 12:17:21

Is the boot priority correct? You need to select the one with OS.

kaiohoh · 发表于 2019-11-21 21:02:27

JayceOoi replied at 2019-11-21 12:17
Is the boot priority correct? You need to select the one with OS.

yes, its is set to boot the machines hdd first.

beelink · 发表于 2019-11-25 17:20:20

This problem may be caused by the hard drive line in the machine, you can contact our after-sales service, we will send you a new hard drive line

kaiohoh · 发表于 2019-11-25 21:42:13

beelink replied at 2019-11-25 17:20
This problem may be caused by the hard drive line in the machine, you can contact our after-sales se ...

Ok, I think i'll do that thx