View: 2384|Reply: 1

Rig an external power switch

[Copy link]

1

Threads

1

Posts

15

Credits

Newbie

Rank: 1

Credits
15
Post time 2019-11-03 04:39:19 | Show all posts |Read mode
I'd like to have the Beelink U55 about 1m from the power on switch (it's setup under a table), so would like to add an additional switch cable.


I can see that the existing power switch inside has a tiny piece of tape over two contacts, and with a screwdriver I can touch those and get it to start up - the actual DIY for the switch itself is trivial, however it's getting a 'jumper' to connect to those two (recessed!) pins that is the issue.

Is there a specialised jumper or plug that can be retro fitted over the (internal part) of the power switch to allow a jumpered connection onto the switch?

Reply

Use magic Report

391

Threads

4189

Posts

110K

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
12737
Post time 2021-11-09 17:17:45 | Show all posts
Hello Dear.
The U55 does not have a jumper that can be connected to the switch, you may want to test other methods
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Sign up

Points Rules

Quick Reply To Top Return to the list