replace SSD m 2 : system don't boot

max76 · Post time 2019-10-19 01:01:32

hello, I have a Crucial SSD mx300 m.2 2280, and I tried to replace the original m.2 SSD into the U55, but the system does not boot .... someone can confirm that the original SSD is a m.2 and not another standard?
or is there something particular I need to enable in the BIOS?

thank you

flavio

cede740 · Post time 2019-11-10 05:58:39

Edited by cede740 at 2019-11-10 17:02

Hi, I have the same problem! I cloned the OS (from 128 GB to Crucial M2 500 GB) and the system does not boot and I cannot acces the BIOS either.
I have the same question than Flavio:

Is there something particular to enable the acces to the BIOS ? Strangely I can boot with the Crucial M2 if I boot the computer via USB.

Thank you

Claus

smershfox76 · Post time 2020-06-24 10:44:42

Hi, I've faced the same problem CRUCIAL 500GB, changed to SSD Samsung, here go the same problem. I couldn't reach BIOS having connected a second SSD(((
The company tech support advised me to wise with ADVANCED tab, but my PC doesn't have this one.
Worried, I really like this PC.

beelink · Post time 2020-06-24 10:56:53

smershfox76 replied at 2020-06-24 10:44
Hi, I've faced the same problem CRUCIAL 500GB, changed to SSD Samsung, here go the same problem. I c ...

Sorry for not paying attention to the previous post due to our negligence, our product supports ssd of sata3, but not ssd of pcie

fishinfool5 · Post time 2021-02-28 23:40:24

beelink replied at 2020-06-24 10:56
Sorry for not paying attention to the previous post due to our negligence, our product supports ss ...

Beelink never responds to the question of why the U55 PC won't enter the BIOS environment after
swapping the original M.2 SSD with a larger (250GB) cloned SATA III M.2 SSD...
If Beelink will not respond with an adequate answer, I too will return the U55.
This makes NO sense whatsoever! Seems to me, reading through the forum messages, that Beelink is even less responsive than Microsoft!!
I know that a cloned SATAIII M.2 SSD must be made bootable before it will load Win 10, but you have to enter the BIOS environment to do that.....Sadly, this U55 PC can't even get that far.. Another complaint: totally INSUFFICIENT documentation!!!

beelink · Post time 2021-03-04 09:52:28

fishinfool5 replied at 2021-02-28 23:40
Beelink never responds to the question of why the U55 PC won't enter the BIOS environment after
sw ...

Sorry for not replying in time
When you replace the original with your SATA III SSD, it can not enter the Bios
Can you enter the system?

Maybe the U55 can not be compatible with your SSD
When you replace your SATA III SSD with the original SSD, can it work normally?

Sniperdogdog · Post time 2022-09-15 19:21:59

Hello friends, I bought a used U57, it came without ram and ssd m2 2280 nvme. Turns on and off without image.
I installed dr3l 1.35v 1600., but without image hdmi1 or hdmi 2., when I turn on the start fan, but on the second it turns off.
where to download bios and reinstall bios. Anyone have an idea, including where to buy the cable for ssd;., FPC HDD cable sata-12p