GT KING DEAD BECAUSE BEELINK POST WRONG FIRMWARE LINK!

frose6565 · 发表于 2019-09-20 10:07:55

Thank you Beelink, you made a typo in your 905 firmware link earlier (which you have corrected but TOO LATE FOR ME!) and now my GT KING IS BRICKED!!

Your USB Burn tool is useless, i can't even get my PC to detect my GT KING anymore!!

If anyone has a way to fix my GT KING please let me know

frose6565 · 发表于 2019-09-20 10:31:19

My GT KING now doesn't even output to HDMI! I can't use USB Burning Tool, SD Card method doesn't work anymore!

Beelink your mistake caused my box to be BRICKED!!

frose6565 · 发表于 2019-09-20 14:33:05

which pins should i short to recover the gt king box? anyone?

beelink · 发表于 2019-09-20 14:56:46

frose6565 replied at 2019-09-20 10:31
My GT KING now doesn't even output to HDMI! I can't use USB Burning Tool, SD Card method doesn't wor ...

I am very sorry to bring you trouble, please check the firmware burning tutorial in the link. If you still can't burn the firmware according to the tutorial, please contact our after-sales email address and we will solve it for you.

https://beelink-my.sharepoint.co ... TT1RBNW2MQ?e=jLEJJY

frose6565 · 发表于 2019-09-20 16:45:07

i have tried the step in the video so many times, the pc still does not detect GT King

timo · 发表于 2019-09-22 12:16:11

Edited by timo at 2019-09-22 13:16

I had the same issue, no thanks to the certain staff members of Beelink.....

My solution:
1) Import image and click start on USB Burning Tool 2.1.7.0
2) Plug in USB and power simultaneously.
3) Wait to see if it was recognised.
4) If not recognised, unplug USB and power and go back to step 2. (I had to do this over 100 times - seriously - but it EVENTUALLY worked!)
5) Rejoice as it finally recognised, and installed the correct firmware.

renixo · 发表于 2019-09-22 20:23:12

Edited by renixo at 2019-09-22 20:25

timo replied at 2019-09-22 12:16
I had the same issue, no thanks to the certain staff members of Beelink.....

My solution:

I have the same problem as frose6565 I have tried more than 100 times with the USB Burning Tool and Sdcard but nothing to do I have always walled it up for the same reason firmware of the other model beelink compliments you have made a nice mess all at our expense .. only hope which pins should but on the net and not even Beelink I found news about it I hope one day I can wake up my box ..

mikehcl · 发表于 2019-09-23 00:51:07

Keep trying, change your pc's usb ports, try usb 2 and usb 3, before or after it will recognize it! I also had to try many times and when he recognized me he made a mistake.

frose6565 · 发表于 2019-09-23 01:34:18

Thanks for the replies guys, but unfortunately all the steps mentioned still does not work. Beelink please provide an alternative solution. Now my box is useless.

frose6565 · 发表于 2019-09-23 01:35:52

my fingers are cramped from doing the steps one too many times..