GT1 Ultimate problem with webcam

John1979

Hello. i have beelink gt1 ultimate with s/n LPN1... firmware build number GT1_711N1 release
Such problem, I have two Webcams - logitech c270 and A4Tech usb 2.0, at connection of these Webcams I am not seen by the interlocutor in Skype, at inclusion of the standard application "Camera" gives an error. This problem is not only mine, but many others too
I used an auto-translator when writing, where i can be wrong, but I think the idea I gave on the issue

beelink

Have you tried replacing other USB ports? We tested Logitech's camera and it works fine.

John1979

beelink replied at 2019-07-18 09:39
Have you tried replacing other USB ports? We tested Logitech's camera and it works fine.

Yes, I tried to connect a webcam in both USB connectors - I did not see a difference.
As a result, after another attempt to run the webcam, I came to the following results:
Interestingly, when I turn on the TV box or reboot it, the first time you start the standard application "Camera" (which was originally installed by the manufacturer), the application works fine, but after the application "Camera" close and then open it again, the following message appears - "camera Error. Unable to connect to camera."
Skype:
it turned out to make the webcam work, where the interlocutor saw me, but: 1) the camera turns on only when wi fi is enabled, if Ethernet cable is connected, the camera does not work. 2) when a video call on Skype, the camera initially does not work, you have to press the "back" button on the remote control and then click on "resume call" - after such manipulations, the interlocutor can see me.