unbrick GT1-A

ja_ko · 发表于 2019-05-27 00:52:26

Hi, please tell me how to unbrick GT 1-A. TV Box will not connect to USB_Burning_Tool.

beelink · 发表于 2019-05-27 14:18:16

Please insert the USB 2.0 port of GT1-A. If you use USB 3.0, you will not be able to connect.

ja_ko · 发表于 2019-05-28 02:46:34

Unfortunately, the problem will be more difficult. I know how USB_Burning_Tool works. I've already used ALVATECH GT1-A ROM on the box. It's a good ROM, but I wanted to try another and somehow the BOX doesn't work. When switched on, only the LED lights. Some idea?

ja_ko · 发表于 2019-05-28 02:47:22

beelink replied at 2019-05-27 14:18
Please insert the USB 2.0 port of GT1-A. If you use USB 3.0, you will not be able to connect.

Unfortunately, the problem will be more difficult. I know how USB_Burning_Tool works. I've already used ALVATECH GT1-A ROM on the box. It's a good ROM, but I wanted to try another and somehow the BOX doesn't work. When switched on, only the LED lights. Some idea?

beelink · 发表于 2019-05-29 11:09:48

ja_ko replied at 2019-05-28 02:47
Unfortunately, the problem will be more difficult. I know how USB_Burning_Tool works. I've already ...

Try another one? What other firmware does your GT1-A flash? The TV Box should flash the corresponding firmware. If the wrong firmware is flashed, it may cause damage to the machine.