Beelink GT1 dont upgrade from OTA

MickHammer · Post time 2016-09-30 20:04:27

My Beelink GT1 received today new FOTA firmware.
All downloaded.
I gave the command to reboot the device for the firmware upgrade. It appears reboot, and that's it!
The inscription hung for an hour, I deliberately waited, but nothing happened.
After an hour I firmly overloaded unit via power off all download to the old firmware.

What am I doing wrong? help me please

Screenshot in attach

sandog · Post time 2016-10-01 08:20:54

Note: The author has been banned or deleted.

khalid · Post time 2016-10-01 10:10:03

unplug and updated again... or hard reset

press reset button and plug power and hold until beelink logo pop up...

theyipper · Post time 2016-10-01 13:31:09

Pinhole on bottom of unit is the reset button.

Also after downloading update, choose "Update Later" and manually shutdown/reboot.
That should help with avoiding the reboot hang.

sandog · Post time 2016-10-01 17:54:14

Note: The author has been banned or deleted.

dazza76 · Post time 2016-10-01 18:45:22

download update later and reboot seems to work

sylad · Post time 2016-10-01 20:14:54

Did OTA update with no problems here

mediafreak · Post time 2016-10-01 21:16:47

^ I second that. No issues with the OTA.

gaviscon · Post time 2016-10-02 04:27:09

Hi, same here, OTA did not work at first time. See below my method:

- shutdown the box
- press the reset button under the box with a thin stick and stay put.
-start the box with power button on remonte control
- realease reset button when you enter the recovery mode
- with remote control, chose wipe data/reset
-reboot the box and wait a little bit longer to enter home-screen
-execute ota update. download the update and press the update button just once and it should work.

Be carefull, you will lose all your data and applications.

I hope this will help and sorry for my english:loveliness:

sandog · Post time 2016-10-02 07:05:27

Note: The author has been banned or deleted.