BT3 didn't boot anymore. Blue-red light blinking

zizime · Post time 2019-04-13 04:09:48

Hi, after 2 houres my new beelink didn't boot anymore. The led is flashing quickly red and white.

please help me

Sandro

beelink · Post time 2019-04-15 13:50:33

Hi
You can try the reset hole at the bottom of the machine and press it for more than 5 seconds. If there is no effect, please contact the seller to return.

zizime · Post time 2019-04-15 20:29:32

:victory:

it works ! Thanks a lot

caiomattosjf · Post time 2019-10-14 20:07:02

beelink replied at 2019-04-15 13:50
Hi
You can try the reset hole at the bottom of the machine and press it for more than 5 seconds. If ...

I have the same problem. I tried the reset by holding the power on button. It didnt work. There is another reset buttom? can you explain how to acess it?

beelink · Post time 2019-10-16 10:30:35

caiomattosjf replied at 2019-10-14 20:07
I have the same problem. I tried the reset by holding the power on button. It didnt work. There is ...

The power button can only be pressed and restarted for a long time. There is no reset function. The reset hole is located at the bottom of the machine. There is a small hole. You can try to press the button in the small hole with a paper clip for about 5 seconds to reset.

persilierhaziel · Post time 2020-07-01 19:54:35

beelink replied at 2019-10-16 10:30
The power button can only be pressed and restarted for a long time. There is no reset function. Th ...

i have located the hole to reset and proceed but without success

beelink · Post time 2020-07-02 09:35:58

persilierhaziel replied at 2020-07-01 19:54
i have located the hole to reset and proceed but without success

1. Have you refreshed other bios?
2. Have you installed other systems?
3. Could you try to reset the CMOS battery? The link is the method to reset the CMOS battery
https://mega.nz/file/n2RS1S4K#Vr ... FGq2_UwGyQA0kbqeXi0

netcedlou · Post time 2020-07-02 13:25:29

Same here...
It happens after a bios update...
The reset hole or the clear cmos didnt succeed...

beelink · Post time 2020-07-02 13:57:43

netcedlou replied at 2020-07-02 13:25
Same here...
It happens after a bios update...
The reset hole or the clear cmos didnt succeed...

1. Have you refreshed other bios?
2. Have you installed other systems?

netcedlou · Post time 2020-07-02 14:43:32

No others system, just a bios flash... Since red/blue blinking...
Even with a flash programmer the unit still blink red/blue... maybe with another bios, but it seems to be bricked !