GS1 has been abandoned by Bee-link?

Michaeldb

After 1 whole year you haven't released firmware to fix the auto not set to output on HDMI by default . it still cant transcode mp4 from plex, if the plex server doesn't transcode it cant play the video. Why after only such a short time from release are you abandoing the GS1?

Ratteler

Please refer to the firmware and application in the link to fix this problem.
http://www.bee-link.com/forum.ph ... &extra=page%3D1

OK. As the Forum name suggests, I have a GS1 not a GT1 in any form.

beelink

hi  friend
This problem is caused because the TV BOX does not detect HDMI access when it is turned on, so it does not output sound from HDMI. Please turn on the TV and then turn on the TV BOX to solve this problem.

best regards

dima1992

Why you, dear Beelink, do not correct this problem (s) for example, but make all of its users suffer in such a degrading way ???

dima1992

Beelink, say something, do not be silent !!! Or, before it is too late, fix it quickly !!!

Michaeldb

beelink replied at 2019-01-24 04:46
hi  friend
This problem is caused because the TV BOX does not detect HDMI access when it is turned o ...

Thank you for explaining.

dima1992

how can you do that? Why do not you need to solve this problem at the program level and blog for software and everything ??? Horror!;P:Q:curse:

Ratteler

Now can you solve why your Light Home (cr)app keeps crashing repeatedly?
The way you have "supported" the GS1, I would TERRIFIED to recommend ANY of your products to ANYONE!!!!

Ratteler

beelink

Ratteler replied at 2019-02-11 10:39
Now can you solve why your Light Home (cr)app keeps crashing repeatedly?
The way you have "supported ...

Please refer to the firmware and application in the link to fix this problem.
http://www.bee-link.com/forum.ph ... &extra=page%3D1