HELP GT1 Does not start

vitals3d · Post time 2019-01-20 02:40:47

I did a lot of stupid things, stitched my firmware with the firmware GT1_710N1, it stopped showing and the computer doesn’t see it. It was firmware 709D0_20180702. S/N B706DBGH20613 32G:'(

Phant0m`` · Post time 2019-01-20 05:59:05

Hi vitals3d.

Bare with me here... Just so there's no doubt.. What is the serial number of the GT1 box? Only needing the first four digits of it. It's located underneath of the box.

Then specify if it was OTA ( Over-The-Air ) update, or update you have manually applied. Give me the direct link to the Beelink firmware post that you grabbed the package from, along with if you have used SD Card method or the USB Flash method of upgrading.

Thank you in advanced. :)

vitals3d · Post time 2019-01-20 16:17:41

Edited by vitals3d at 2019-01-21 03:06

I took the firmware here
http://www.bee-link.com/forum.php/forum.php?mod=viewthread&tid=44886&fromuid=18779
GT1_710N1 20190118 updated through the SD card.
Here is S/N S/N B706DBGH20613 and what firmware was 709D0_20180702
The update started well, then just a black screen. PC does not see USB:'(
p.s. how stupid i am:L
Is it possible to send it to you for repair?

Phant0m`` · Post time 2019-01-21 10:12:37

Edited by Phant0m`` at 2019-01-20 22:15

Unfortunately GT1 boxes that has serial number starting with the first five digits ' B706D ' isn't compatible with GT1_710N1 firmware packages that's currently only for the GT1 boxes that has the first four digits ' LPN1 '. You actually already had the most recent firmware for your GT1 box.

Now you have no signal on TV, and the PC Amlogic USB Burning Tool isn't recognizing / detecting the GT1 device anymore.

Now you must temporarily forget about using Amlogic USB Burning Tool.

You have to download GT1_709D0 20180702 firmware package... the USB flashing image ( *.IMG file). Beelink refers it as " USB cable firmware " and the actual filename for your type box is GT1_709D0_20180702.img

You have to follow the tutorial;

How to unbrick / revive any Amlogic devices.
http://www.bee-link.com/forum.php/forum.php?mod=viewthread&tid=44927&extra=page%3D1

Thehobit · Post time 2019-01-21 12:30:21

HARD BRICK, Help needed,

Link to the S/N and layout"

https://photos.app.goo.gl/DfVHnmrc6U...B1ZW9qcDRDN1ZB

burned the "MULTI_Z6BASED_ATV10.7.img" with the burning tool, while it reached 100% and showed success.
However, the only way I could burn without errors was to UNCHECK "Erase Bootloader".
Nevertheless, the device is now dead, does not boot at all, burning tool does not recognize it, therefore can't re-burn with the burning tool, can't also brush with the SD card.
Also tried to shorten the two pins with no success.
Appreciate help. Thanks

Thehobit · Post time 2019-01-21 12:43:08

Edited by Thehobit at 2019-01-21 18:47

Please delete :)

vitals3d · Post time 2019-01-24 17:47:00

Phant0m`` replied at 2019-01-21 10:12
Unfortunately GT1 boxes that has serial number starting with the first five digits ' B706D ' isn't c ...

I did everything, but it does not work, the LED does not flash, it only lights up.:'(

daniel0178 · Post time 2019-01-27 01:26:14

Edited by daniel0178 at 2019-01-27 02:23

I have the same GT1 model and I can't revive the box either!

By contrast, mine is recognized by the USB burning Tool, but no firmware update process exceeded 7% !