GT1 Ultimate LPNGBNF00861 "Broken" ?

Nano33320

Bonjour à toutes et tous (désolé je ne parle pas anglais, j'utilise Google Translate) Mon Belling GT1 Ultimate à presque fonctionné 2 heures sur éthernet ... sans trouver le WiFi du domicile ! Après il s'est bloqué, j'ai essayer de réinstaller la ROM ou ce que je crois être une ROM adapté (j'en ai essayé plusieurs pour un résultat identique) avec : 1°) USB Burning Tool 2.1.6 => message d'erreur [0x10105004]Romcode/Initialise DDR/Read initialise status/Error result 2°) Burn Card Maker 2.0.2 => il ne se passe rien pas de reset,  calme plat... Merci de votre aide, j'aimerais bien le faire fonctionner Cordialement Nano ___________________________Translation_________________________ Hello everyone (sorry I do not speak English, I use Google Translate) My Belling GT1 Ultimate almost worked 2 hours on ethernet ... without finding the home WiFi! After it got stuck, I tried to reinstall the ROM or what I believe to be a suitable ROM (I tried several of them for an identical result) with: 1 °) USB Burning Tool 2.1.6 => error message [0x10105004] Romcode / Initialize DDR / Read initializes status / Error result 2 °) Burn Card Maker 2.0.2 => there is nothing reset, flat calm ... Thank you for your help, I would like to make it work Cordially Nano

Nano33320

Bonjour à toutes et tous (désolé je ne parle pas anglais, j'utilise Google Translate)


Mon Belling GT1 Ultimate à presque fonctionné 2 heures sur éthernet ... sans trouver le WiFi du domicile !
Après il s'est bloqué, j'ai essayer de réinstaller la ROM ou ce que je crois être une ROM adapté (j'en ai essayé plusieurs pour un résultat identique) avec :
1°) USB Burning Tool 2.1.6 => message d'erreur [0x10105004]Romcode/Initialise DDR/Read initialise status/Error result
2°) Burn Card Maker 2.0.2 => il ne se passe rien pas de reset,  calme plat...


Merci de votre aide, j'aimerais bien le faire fonctionner
Cordialement
Nano





___________________________Translation_________________________
Hello everyone (sorry I do not speak English, I use Google Translate)

My Belling GT1 Ultimate almost worked 2 hours on ethernet ... without finding the home WiFi!
After it got stuck, I tried to reinstall the ROM or what I believe to be a suitable ROM (I tried several of them for an identical result) with:
1 °) USB Burning Tool 2.1.6 => error message [0x10105004] Romcode / Initialize DDR / Read initializes status / Error result
2 °) Burn Card Maker 2.0.2 => there is nothing reset, flat calm ...



Thank you for your help, I would like to make it work
Cordially
Nano

beelink

Nano33320 replied at 2019-01-08 17:34
Bonjour à toutes et tous (désolé je ne parle pas anglais, j'utilise Google Translate)

hi  friend
You may have used the wrong firmware, which caused the flash to fail. Please provide the S/N code on the back of your machine and we will provide you with the correct flash firmware.

bets regards

Nano33320

Hello
thank you

my Box TV is a GT1 Ultimate S/N: LPNGBNF00861
Cordially
Nano

Nano33320

Nano33320 replied at 2019-01-09 14:56
Hello
thank you

Hello,

What firmware for my GT1 Ultimate S/N: LPNGBNF00861

best regards
Nano

Nano33320

Nano33320 replied at 2019-01-11 18:09
Hello,

What firmware for my GT1 Ultimate S/N: LPNGBNF00861

It's pitiful ...
Beelink GT1 Ultimate, low cost, very low reliability!
Partial operation (2h without WiFi), then "Beelink" screen and black screen!
I tried to raise, to reinstall the beast is dead!

I have sent here my serial number at the request of Beelink, no answer ...
I would never buy Box TV Beelink, It's sh ..!

Good luck

Phant0m``

Nano33320 replied at 2019-01-12 15:41
It's pitiful ...
Beelink GT1 Ultimate, low cost, very low reliability!
Partial operation (2h witho ...

LPN1 ...GBNF00861 ?

You be looking for GT1_up to date_709N1 S/N: LPN1  http://www.bee-link.com/forum.ph ... 6orderby%3Dlastpost

:)

Nano33320

Phant0m`` replied at 2019-01-13 03:49
LPN1 ...GBNF00861 ?

You be looking for GT1_up to date_709N1 S/N: LPN1  http://www.bee-link.com/fo ...

Ok, thanks for the link

You're right the S / N is "LPN1GBNF00861"

however, the beast (the TV box) seems dead!
- no reset with SDCard
- no connection on the PC ...
the "libusb-win32 Usb Devices" drivers are not requested
(they were the first time, then nothing, they work with another box MXQ-Pro 4K)


Is there a solution (other drivers) to view the files via the windows 10 explorer?

regards

Phant0m``

Nano33320 replied at 2019-01-14 04:33
Ok, thanks for the link

You're right the S / N is "LPN1GBNF00861"

I guess since you already had it installed, and accepted the drivers the first time, It didn't ask again. You are running the utility installer under ' Run as Administrator '? If you done this, then the issue is elsewhere.

Does the Beelink still show Power LED when adapter is plugged in?

Nano33320

Phant0m`` replied at 2019-01-14 22:30
I guess since you already had it installed, and accepted the drivers the first time, It didn't ask ...

I installed and used "USB Burning Tool" in administrator mode.
I have tried, in administrator mode with complete uninstallation between each test, versions v2.0.5 / v2.0.9 / v2.1.2 and v2.1.6
The blue power light turns on, but the box is not detected, the drivers "libusb-win32 Usb Devices" (WorldCup Device) are not solicited.
USB Burning Tool does not see the box

I also tried Burn Card Maker 2.0.2, no reaction.
I have the impression that in this case the box does not go into recovery mode ...
Turning on the power does not turn on the display via HDMI, which remains black.

I also tried via ADB, to kill a fastboot, box not detected ...

The cords are new and tested, the PC under Windows 10 1809.
Other tests on a second PC also under windows 10 1809, same result rather no result ...

Is there a way to view the box on the Windows Explorer as for a smartphone?

Thank you for returning