Please select To the mobile version | Continue to access the desktop computer version
View: 4098|Reply: 4

Beelink SII Set power on auto power on function

[Copy link]

391

Threads

4190

Posts

110K

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
12685
Post time 2018-11-23 16:35:32 | Show all posts |Read mode
Beelink SII Set power on auto power on function


Note: The BIOS version is: F4G-EX3 0.01 X64 —— Supports Set power on auto power on function
First of all, you can confirm whether the machine has a jump hardware through the BISO version.
Boot, immediately press the Delete button on the keyboard, enter the BIOS interface, find the
Project Version on the Main page, the right BIOS version is: F4G-EX3 0.01 X64, confirm that you can set the call to boot
图片1.png

Preparation: Beelink SII machine, screwdriver
图片2.png

The steps are as follows:
1. Remove the plastic gasket at the bottom of the machine
图片3.png

2, use a Phillips screwdriver to remove the bottom four screws
图片4.png

3. Use the disassemble blade to open the case from the side of the start button
图片5.png
4, Remove the two fixing screws on the motherboard
图片6.png

5. Pick up the motherboard from the side of the start button (note: the motherboard is connected to the top case cable)
图片7.png
图片8.png

6,The icon below shows the jumper position set for Auto Power. There are three jumper posts. The default jumper clip connects the jumpers 2 and 3.
图片9.png

7,Remove the jump hardware and connect to the jumpers 1 and 2 to enable the caller to start.
图片10.png
图片11.png



Reinstall the motherboard, fasten the case, and install the screw pads.
The Beelink SII call is set up from the start.
Beelink SII Set the call automatic boot function.pdf (743.82 KB, Downloads: 590)
Reply

Use magic Report

1

Threads

18

Posts

157

Credits

Member

Rank: 2

Credits
157
Post time 2018-12-03 07:53:29 | Show all posts
Where can I find that BIOS version? My version is different. This can solve the problem that you can not solve with the ignition button.
Reply Support Not support

Use magic Report

0

Threads

1

Posts

30

Credits

Newbie

Rank: 1

Credits
30
Post time 2019-03-07 18:04:36 | Show all posts
I have the correct bios. I put micro switch as the image but when I connect power plug the led light 2 seconds and then switch off his light and nothing happens.
How can I solve this issue?
Reply Support Not support

Use magic Report

1

Threads

18

Posts

157

Credits

Member

Rank: 2

Credits
157
Post time 2021-10-11 03:17:27 | Show all posts
Any BIOS update to download now in 2021?
Reply Support Not support

Use magic Report

391

Threads

4190

Posts

110K

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
12685
 Author| Post time 2021-11-02 14:34:08 | Show all posts
yban replied at 2021-10-11 03:17
Any BIOS update to download now in 2021?

Hi, there is no BIOS update for SII, if you encounter any product problems, you can contact our after-sales email at
Support-PC@bee-link.com
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Sign up

Points Rules

Quick Reply To Top Return to the list