Have Brand New Beelink GT1 U and it does Not work at all

wilspeak · 发表于 2018-11-03 07:25:02

Edited by wilspeak at 2018-11-03 07:49

I ordered a Brand New Beelink GT1 U From Amazon and I followed the instructions to the letter and when the Box didn't work. I plugged everything in and I got a BLANK screen on ALL of the HDMI ports that I tried on each TV (I tried 2 TV's with 3 HDMI ports each). I tried on the first TV than another TV with the same results. I am about to return the box. Can anyone tell me what they think of this situation? :@Thank You

beelink · 发表于 2018-11-03 11:16:27

hi， Is the TV BOX power indicator always on?

wilspeak · 发表于 2018-11-03 12:01:46

Edited by wilspeak at 2018-11-03 12:04

beelink replied at 2018-11-03 11:16
hi， Is the TV BOX power indicator always on?

Yes the power indicator Light is always "on". Please tell me what's up?

beelink · 发表于 2018-11-03 13:28:02

wilspeak replied at 2018-11-03 12:01
Yes the power indicator Light is always "on". Please tell me what's up?

Hi
1. Please confirm that there is no problem with the HDMI cable, and the machine and monitor are connected properly.
2. Choose the right source.
3. Try to re-plug the HDMI cable.
4. The machine may be incompatible with some of the displays and try to replace the display.
best regards

wilspeak · 发表于 2018-11-03 21:09:07

beelink replied at 2018-11-03 13:28
Hi
1. Please confirm that there is no problem with the HDMI cable, and the machine and monitor are ...

1. I did confirm that there is no problem with the HDMI cable, and the machine and monitor are connected properly.
2. The right source was chosen.
3. I re-plugged the HDMI cable into all of the different HDMI ports on both TVs that I have.
4. You said "The machine may be incompatible with some of the displays and try to replace the display." I think that buying a New TV just for an $80 android box is Outrageous. If a Google Chrome cast attachment device and Play Station box can work on Both of my TVs which are 2 different models and brands of TVs, the Beelink GT1 box is supposed to work on at least one of my TVs. I want to return the Beelink GT1 and I am Very Very disappointed. Why wasn't it told that the device may not work on certain TVs.

beelink · 发表于 2018-11-05 10:18:43

wilspeak replied at 2018-11-03 21:09
1. I did confirm that there is no problem with the HDMI cable, and the machine and monitor are con ...

Hi
Sorry, if you have tried all the operations have no effect, please contact the seller to return.

best regards

mikeyd · 发表于 2018-11-06 02:54:48

welcome to the beelink (product fail) club

Koets · 发表于 2018-12-05 06:29:24

http://www.bee-link.com/forum.ph ... &extra=page%3D1

Just flashed this fw, using the prescribed SD-card method, 100% complete, but same build nr etc.

Same problems, still "no signal" and/or blinking black/blue screen.!

Pls help.

LN1GB fail!

Koets · 发表于 2018-12-17 07:08:05

Still no answer and no solution!!