GT1 708NO standrad/ultimate 2G+16G/2G+32G/3G+32G G912/S912(QCA9377)

king555

Yes, Phant0m is right, 708NO is working very good, no freezes no resstarts on GT1 standard 2/16
(FOTA upgrade from 703..)

n1gh7man

Phant0m`` replied at 2018-04-12 22:09
Hi guys! This firmware works perfectly for the box it's intended for. I have been using this firmwar ...

On previous firmeware (707) all works fine, but 708 is piece of ....,  what am I doing wrong ???
Maybe after FOTA update I must reset all settings? I don't know....
PS My GT1 Ultimate connected to TV throuth Onkyo TX-NR414 Receiver, perhaps this affects freezes ...

gpusavat

Phant0m`` replied at 2018-04-15 11:43
Yes. FOTA, 'Firmware Over-The-Air' updates, and can be done, I believe from even GT1 704N0. Well bes ...

Completed my update to GT1 708NO using USB. works great, thanks phantom!  Having gone thru this I have some advice to those who wants to do it:
1.  Reinstall the USB Burner even if you already have it as it will ask and install the correct driver for you during the installation - one of the reasons why the GT1 not detected when plugged in.
2.  Load the correct GT1 708NO version as Beelink has many versions e.g QCA9377, AP6255,
3. When you are ready, click start on the USB Burner screen, with the reset pin pressed plug in the USB cable and wait for the unit to be detected
4. Once detected release the reset pin and wait for process to be completed.
5. Click stop on the USB Burner screen, then pull out the USB cable and you are done!
6. One caveat:  It is a brand new install, you lose all previous setups

Cheers!

Gia

Updated standard gt1 2/16gb box with 708 and can confirm, so far, best smoothest firmware made by beekink.

n1gh7man

beelinK
Another bug on the firmware 7xx (708NO too), while watching the video H264 on the hardware decoder appear artifacts on a black background (squares as large pixels) (MXPlayer, KODI), on software decoder works fine ...

MaduserGt1

I have GT1 Standard 2Gb ram 16Gb rom board GT-T_V30_20160831
when I flash this firmware 708NO AP6255 box stop on logo

I try few firmware and box freez on logo each rom I try Please Help

Shams

Hello
I have Beelink GT1 Ultimate 3GB 32GB unit, 2 days back i have updated with firmware 709N0_20180718_191039, since then i am getting problem in rebooting, every time when switching on or restarting box the screen goes GREEN and takes more tha 1 hour to reboot.
Kindly provide the solution.

Before it has firmware 709D0_20180702_100659

Please help fix this issue

gerawilson

Hi, I have a box tv Bee Link GT1 Ultimate at 01 year. Yesterday it was defective. League starts and hangs after a few minutes. Does recovery by the android and has done the factory recovery and did not solve. What else can I do? Can you help me?  S/N  B706DBGH20711   32G
Sorry for my english, I'm Brazilian and I'm using google translator.   

fokemon

double post...

fokemon

ETHERNET ON WAKE UP still not working!!!!

will  a usb to rj45 solve the problem??