Dead after bios update

danielslb · 发表于 2016-08-07 19:48:54

Hello, my box after a bios update stoped working, it turn on shows a blue ligth but nothing apens .
Can you help me?

spray6969 · 发表于 2017-08-01 00:56:59

Hi same problem Here.

Any news from Beelink ?

ChrisAsn · 发表于 2016-09-03 11:34:13

Hello,
Can you confirm you are still using the initial windows installation and upgraded your UEFI (=new bios) to the last v16 ?

rob · 发表于 2016-10-25 06:34:53

I am not the original poster, but I have the same problem: installed the 32-bit BIOS from here, and rebooting shows a blue light on the box, but nothing on the screen. It appears to be totally bricked.

King · 发表于 2016-10-27 14:32:59

rob replied at 2016-10-25 06:34
I am not the original poster, but I have the same problem: installed the 32-bit BIOS from here, and ...

After updating the BIOS, the machine will restart 2 times, this machine is to install the BIOS, in the background is black screen, the process, please don't power outages, wait a minute

rob · 发表于 2016-10-27 21:46:18

When I updated the BIOS, I waited at least an hour with a black screen, turned it off and on again, and waited another hour. It is bricked.

Bunter221 · 发表于 2016-10-28 16:24:52

Disgraceful ...:@

Trippn · 发表于 2017-07-17 21:45:46

Mine bricked as well, did you find an answer?

FuzzyButtGaming · 发表于 2017-09-04 12:34:53

Howdy! Sounds like you "Flashed" your BIOS, downside is that it is very risky and if something goes wrong like power outage or doing something during the install process you create an expensive paper weight.

Unknown852 · 发表于 2017-10-29 21:32:38

I did a BIOS update and there is only the blue LED blinking slowly, nothing on screen.
What should I do ?