GS1_106N0 (2G+16G)

beelink

Hi dear friend , here comes the firmware for GS1_106N0 !

Current version : GS1_106N0
Based on : GS1_104N0/GS1_105N0


USB  zip :（update_GS1_106N0.img）：

https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_onmicrosoft_com/EuOR69l5sy9HqwRVwUfakyIBoic5pZdeOKvQNFqJtSO-bg?e=MmzbSc


SD card zip : （ota_GS1_106N0.zip）：

https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_onmicrosoft_com/EroLY6FwE9lInFybALAZaFYBUKYK8_KmhcON0dvCTq-kQQ?e=Si06dv

usb burning tool :

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d230f6469689be6c709dbf403d


Improvement :

   
     1. The google play store comes back to normal .
     2. OTA has been available for you .

PS ：Now you can update from the GS1 101N0 to GS1 106N0 with SD card also .  :loveliness:




USB updating :


1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a  recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .

SD card updating :


1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting  > click the option of "about the media"  >  choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
   supply must be firmly good enough to finish this updating , power outages would contribute to a failure .

you can contact with me if you meet some problems .
email : chanchan@bee-link.com / skype : +86 18772960513

shwabo

Nevermind. I upgraded via USB to 106N0 and all seems well now. Google Play is working. I did not have to enable audio hdmi as it was selected already. If I run into anything else I will post back. Thank you Michaeldb for checking google play. Thank you beelink for fixing the firmware. :D

Michaeldb

Thank you Beelink for the quick release. I will try it in a few hours and see how it goes!

Michaeldb

I edited my post and now it is being moderated so in case it is too late for other people:

Google play doesn't work at all. removed account and cant add it back so no access to play store or google account. apps are still there.

Plex search still crashing

auto adjust fps causes frame skip (in plex, didnt test any other). Disabled and rebooted and it seems better now so auto FPS appears to not work.

was no sound, to fix I had to enable HMDI sound output.

will update tomorrow if I see anything else.

beelink

Michaeldb replied at 2018-01-25 03:42
I edited my post and now it is being moderated so in case it is too late for other people:

Google p ...

Dear　friend , thank you for your using and feedback , please try to restore the factory setting and see whether it perform better . :lol

Michaeldb

Thank you, I am busy trying it now and will update once done. That is a lot of work to update firmware!  My internet is really slow so it can take a while. Please tell me this won't be normal for firmware updates?

Michaeldb

Thank you the reset worked and I am connected to Google account again. Testing playback but I suspect it will be fine. Please check searching in Plex that crashes it and option to add volume up and down? (preferably to up and down arrow and not a number on the remote). Will post more issues I find.

shwabo

Michaeldb replied at 2018-01-26 02:23
Thank you the reset worked and I am connected to Google account again. Testing playback but I suspec ...

When you search google play, is it restricted, or is everything showing up like it does with the 103N0 FW?

Michaeldb

I can check in about 6 hours, will post once I know.

Michaeldb

Looks like all apps, not 100% sure. I see a lot of games on the loading page. Any specific thing i can check for?

Michaeldb

I still have the issue where the entire top row of keys on my USB keyboard connected to the GS1 does not work if mouse mode is enabled.