Remote Control Constantly Red Flashing

jojoko · Post time 2017-04-29 15:50:53

Iv'e been useing the Beelink GT1 for 3 months and then suddenly the Remote Control Red Light started Flashing non stop and any key in it doesnt work.
i cant Turn on/Shutdown the TV Box...
What can i do?

Thanks in Advance.

Jacko · Post time 2017-05-05 13:05:14

Hi,

you are not the only one, mine has never been used and it has that problem. Maybe someone will have an answer.

Regards

Johnny5 · Post time 2017-05-07 05:46:05

same here

Johnny5 · Post time 2017-05-07 05:57:16

emailed support also

Phant0m`` · Post time 2017-05-07 06:26:42

It probably won't matter. It seems like the Learning mode is working when It shouldn't be... for you.

Try removing the batteries, and press and hold down on a button for 25 seconds. Put the batteries back in and try again, is the RED light flashing again? Perhaps try different set of batteries?

Jacko · Post time 2017-05-07 13:01:31

Phant0m`` replied at 2017-05-07 06:26
It probably won't matter. It seems like the Learning mode is working when It shouldn't be... for you ...

I have tried that, I thought much along the same lines but I think it is just the cheap and nasty way this remote is built. I opened mine up and it is pretty nasty in side. The circuitry is just painted on with electric paint and the soldering around the 3 or 4 components is quite poor. I did clean up the connections around the transmitter led and the remote then worked for about 30 mins but dies soon after.
This is a new style remote which is really cheaply built, I would think that a lot of them will malfunction.
I have a new one coming as mine was DOA but I don't think it will last long after seeing the inside of the unit.
I hope the actual GT1 is better constructed .........