|
Hi dear , here comes the firmware for GS1_101N0 !
USB zip :（update_GS1_101N0.img）：
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=17b7467cd7a2a417688f869b4927b064e&authkey=AXCj52v8ULqWvnEf2tAu3yc&e=34c907f74d944ad98bd9125947ae47ca
SD card zip : （ota_GS1_101N0.zip）：
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=11ef45a02b5764645b8cf5a85a710d342&authkey=AZk7PNMk2cjZUScOW0HwCPA&e=5845e909825b4439828325ae73fdbad6
usb burning tool :
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d230f6469689be6c709dbf403d
USB updating :
1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a
recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .
SD card updating :
1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .
you can contact with me if you meet some problems .
email : chanchan@bee-link.com / skype : +86 18772960513
| 
Post time 2017-11-16 14:36:36
Post time 2017-11-16 23:16:20
Author