GT1 707NO standrad/ultimate 2G+16G/2G+32G/3G+32G A912/AX12(AP6255)

Fijo1978 · 发表于 2017-12-07 17:47:33

csimion replied at 2017-12-03 23:37
Hi guys,

I have a Beelink Standard GT1 2G/16G with the S/N FX17N6KG0163, Android 6.0.1 build GT_113 ...

Stay on android 6 because 7 has serius issues.

ringorinfret · 发表于 2017-12-08 09:12:44

izzyoo7 replied at 2017-12-02 23:44
Gt1 705NO or 705NO does not resume lan connection on wakeup. The box need to be reboot. Please fix t ...

are you sure it is not the DHCP on your router that does this? it happened to me and I thought it was fault of Android 7 on my boxes..... I realized the IP changed and my DHCP reservations were not good anymore

csimion · 发表于 2017-12-10 20:50:21

Fijo1978 replied at 2017-12-07 17:47
Stay on android 6 because 7 has serius issues.

Thank you for advice, Fijo.

paulo72 · 发表于 2017-12-12 01:06:51

Aderito replied at 2017-11-15 16:47
Well guys... just forget this Box had enough of Beelink. New firmware, same old problems,...that pro ...

Try Zoomtak, they are good

nmcmartins · 发表于 2017-12-15 03:50:07

Beelink is bad!

peternac2003 · 发表于 2017-12-27 20:24:28

I wait solution for 3d games issues, this box dont work ... 5 months to resolve the problem? Its a Shame.. curse:

eruisi · 发表于 2018-01-01 03:52:54

Edited by eruisi at 2018-01-01 04:06

I followed the tutorial video exactly but the USB_Burning_Tool cannot detect any device when I connect my Beelink GT1 A912 with my laptop with USB cable (I was pushing reset button with a nail, I can hear click sound).

Is Laptop USB power enough to flash Beelink box? Do I need to connect my laptop to AC power adapter? Do I have to use USB 2.0 port on laptop side?

I have been stuck at GT1_110M0 for too long. Really want o upgrade it.

Anyone can help?

eruisi · 发表于 2018-01-01 04:18:18

eruisi replied at 2018-01-01 03:52
I followed the tutorial video exactly but the USB_Burning_Tool cannot detect any device when I conne ...

It turned out a connecting issue between USB cable and Beelink USB port.
Flashed the firmware successfully.

jomagaar · 发表于 2018-01-02 01:00:08

eruisi replied at 2018-01-01 03:52
I followed the tutorial video exactly but the USB_Burning_Tool cannot detect any device when I conne ...

Experimenta a entrada USB lateral da box.

m_thecno · 发表于 2018-01-25 03:39:34

Hello, I would like to know that firmware for my 2 box GTI ULTIMATE 3G / 32G that it would work well GT1 707NO, the 707DO I try to install it on one of my boxes and I am not able to instal it , serial number is A912GSE70198 32G and the other box is AX12GSKH40710 32G. On the boxes presently I have GT1 705NO