GT1 707NO standrad/ultimate 2G+16G/2G+32G/3G+32G A912/AX12(AP6255)

beelink · 发表于 2017-11-09 19:40:34

Hello everyone,

Here is coming new firmware 707 version！ :loveliness:

Current version: GT1_707NO_
Based version: GT1_706NO_ /70x...........(USB can be flexible as you know)
Android Version: 7.1.2

Fits for : standrad/ultimate 2G+16G/2G+32G/3G+32G A912/AX12(AP6255)

USB burning tool :

  https://beelink-my.sharepoint.co ... 4JInsGgzNYvz5qnW-9c    (2.0.5)

  https://beelink-my.sharepoint.co ... uaAYAcoK-dm4kmsvCs4       (2.0.9)

USB zip :

https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=150debddfd0404210b312811845a61b26&authkey=Acep8TKiYpaCOhK_GnFdvv4&e=b548f75eb03045238f8c4fb17ebcf0a1

Updating tutorial:

      https://www.youtube.com/watch?v=m8chkgcfcwQ (USB)

Improvement:

1.The Ethernet MAC address can be shown in setting ;
2.Some repeated options have been cleared already .

Pay attention to :

1. A912/AX12-----AP6255 G912/S912-----QCA9377

2. You need to use the firmware which starts from the 70X D0 since a new barcode has been use to the GT1  , i will post it in the next thread . just like this series number shows :

"  GT1 3G+32G D0 version :  A706D0SBH70001 32G  "

You may cause the blue screen / pink screen problems if you get something wrong , so you can as me for help if meet some    problems about it .

3.Some links before the 707 NO have been deleted to avoid the updating errors , you can turn me for help if it's necessary .

4.You can only update the firmware from system 6.0 (301MO/101MO.......) to system 7.0 (701NO......)by USB updating , on the other hand , you can update the firmware from system 6.0 (301MO......)to system 6.0 (312MO,313MO) by SD card or USB updating .

5.Standard edition (2G+16G/2G+32G) : before ( system 6.0 ) <101 MO ( system 6.0 ) < ......113 MO ( system 6.0 ) < ...... updating (system 6.0)

Ultimate edition ( 3G+32G ) :
before ( system 6.0 ) <301MO ( system6.0 ) < ......313MO ( system6.0 ) < ...... updating (system 6.0)

Standard edition / ultimate edition :
701 NO ( system 7.1 ) < 702 NO ( system 7.1 ) < ...... updating (system 7.1 )

If you have any problem, please contact with me at any time:

chanchan@bee-link.com :lol

skype : +86 18772960513 (chanchanwang)

barmalei · 发表于 2018-01-27 20:48:25

Edited by barmalei at 2018-01-28 21:44

jckbrtn replied at 2018-01-25 05:07
Hi folks,

I didn't use my GT1 A912 for a while.

Yes, you can upgrade from 113 to 707 by using USB cable. But you will lose all information and software settings due memory reformatting. So I suggest you to use a backup like Titanium Backup prior to firmware upgrade.

peternac2003 · 发表于 2017-12-27 20:24:28

I wait solution for 3d games issues, this box dont work ... 5 months to resolve the problem? Its a Shame.. curse:

Merom · 发表于 2017-11-26 21:56:20

@beelink there are a lot of users with defective AX12 units that are still waiting a solution. Where is the technical support??

memek · 发表于 2017-12-01 22:46:34

Edited by memek at 2017-12-01 22:48

Hi beelink,
e.g. "REAL RACING 3" from Google Play :)

Navinshark · 发表于 2017-11-16 00:48:42

AX12 series, still unable to play games, 3D issue.

Aderito · 发表于 2017-11-15 16:47:03

Well guys... just forget this Box had enough of Beelink. New firmware, same old problems,...that probably will l never be solved. I think this is not "software" problems but hardware ones, or it will have been solved so far. Games just don't work, still have Ethernet problems (after wakeup from Standby mode).

memek · 发表于 2017-11-14 15:36:19

Edited by memek at 2017-11-14 15:41

Hello,
I was able to properly load the new 707NO firmware to the S912 AX12 (AP6255), but it is still a problem with the correct display of 3D games, such as Real Racing 3.
There is also a problem with Antutu Benchmark 3D.
Please solve this problem, which has been occurring since the beginning of the AX12 series.
I would be very grateful for Your help.
Best regards.

Navinshark · 发表于 2017-11-10 00:52:25

Nice to see, does this fix issue with 3d problem, currently 705N0 firmware, unable to play single game, not even crossyroad

Merom · 发表于 2017-11-10 01:48:37

Hi, could you provide the SD package? Unfortunately I don't have the right USB cable...

joaoccmartins · 发表于 2017-11-11 00:29:35

My box doesn't get recognized by the pc... No matter what I try! Is there a OTA package???

itai · 发表于 2017-11-11 20:26:01

Hi
Any news about the bt speaker problem you had at previous versions? I'm waiting for that fix in order to upgrade...
Thanks.

orion696 · 发表于 2017-11-12 01:17:53

Hi, there is a problem with the Beelink Sharepoint site, is there any other mirror for firmware download? :( thanks !

ilkertr · 发表于 2017-11-12 16:54:25

WHERE SD card zip?

sdj5882 · 发表于 2017-11-13 09:42:57

My GT1 Ultimate doesn't get recognized by the pc with usb cable... No matter what I try!

bjax22 · 发表于 2017-11-13 14:47:25

sdj5882 replied at 2017-11-13 09:42
My GT1 Ultimate doesn't get recognized by the pc with usb cable... No matter what I try!

Have you try using USB Y-cable?

sylad · 发表于 2017-11-13 17:57:03

sdj5882 replied at 2017-11-13 02:42
My GT1 Ultimate doesn't get recognized by the pc with usb cable... No matter what I try!

It could be your USB cable.
Try a better quality cable.