GT1 firmware upgrade fails - Android Error

ism55ism55

Hi
I have a Beelink GT1 TV Box Octa Core Amlogic S912 [size=1.2em] -  2GB+32GB
[size=1.2em]Ive tried few times to perfrom FOTA - it downloaded the image , asked to reboot, aftre reboot i get an "Android Error" (aftre i perfrom addtional reboot everything is functional).
[size=1.2em]

[size=1.2em]Same happanes few times.
[size=1.2em]How can i upgrade the Beelink firmware ?
[size=1.2em]

Thanks in advance.
ISM55ISM55

ism55ism55

Anyone ? Someone can help with this problem ?

khalid

if you have problem update thru fota you can try update using Usb burning tool but you need usb male to male to work or

try this

reboot and remove any usb thumb drive or sd card or wireless mouse..  only using remote to update your firmware

alasan

Try this.
"I found solution!!!
Remove any USB or MICRO SD card.
Turn off the TVBOX and remove the electric from the TVBOX.
Under the device has a small hole. This is the Reset button.
You need to press that buttom and in the same time connect GT1 to the electric.
after 4-5 second release the button and you will enter to the Recovery.
1) press " Wipe Data Factory Reset" and then YES.
2) press "Wipe Cache" and the YES.
3) Reboot system.

It will clean the system .(everything will be deleted!!!!)
After yo connect to the WiFi go to Update.
press the update button and the system will tell you that you have update.
Download the update. when the download finish, press "update later" (its very important)
Go back to the update app and then press Update NOW.
It will update the sysyem to 109.
its work for me :-)
good luck
p.s.
sorry for my bag english..... "
I do it and my GT1 have 110 Firm.

alasan

This is not mine but I do not remember where I read it.
It works
My reset button does not work and to access recovery mode I did it with an app called 'Reboot' or similar

alasan

The last thing I read that it was only necessary to make "Wipe Cache" but not tested yet
Good Luck

bunkered

I had the same problem.  I realized that I had a micro SD card installed and as soon as I removed it, re-booted the box and tried the update again everything worked perfectly.  I was able to successfully update to 109 and then update again to 110.