Mini MXIII II bricked after flashing custom FW with USB burning tool

Valery02

I ws not realy happy with"original" firmware and flashed custom firmware for S905x
two flash processes for different custom firmwares were successfully
But II tired to flash third custom FW to compare and chose best variant for me
The flashing process with USB burning tool was successfully according tool status, but it brought to problem- cyclic reset after appearance of bootlogo.
No posibility to flash the device neither with USB cable (don't recognize by PC) nor with micro SD card (don't start from it; checked with different FW and SD cards). It looks like bootloader is corrupt.
Any ideas to recover the device?
Please keep in mind the revision of eMMC by this device, what does the live diffucult...

beelink

hello dear , could you make a video to show what you happend  ? i can't capture your words . :$

Valery02

flashed custom FW->start box->blueLED light->appears custom bootlogo for some sconds->reset->blueLED light->appears custom bootlogo for some sconds->reset->....
Do you have picture of board with info to short pins?

Valery02

I found info with board layout and pins what to short DAT0 and DAT1 to get device in state to flash
for Beelink G1 2/16:

Valery02

here are found pictures gor G1 (912, 2/16). My MX3 2 box (905x, 2/16) has other layout.