ETHERNET ON WAKE UP +NOTIFICATIONS BAR ISSUES

thepower

If you set a static IP address on the device it seems to keep the connection. I haven't lost the Ethernet connection since i set this on my box about a week ago and it was disconnecting daily using DHCP.

Phant0m``

With regards to Internet connectivity, or lack of over Ethernet cable after returning from sleep with these boxes. I've helped a friend buy premium quality Ethernet cable and installed it. Considering the WiFi in these boxes are very poor at little distance.

Anyways I've tested the connectivity via Ethernet and all was well, went home and later on I've received a phone call from this person stating he's without Internet again. I didn't think to test, while I was over there, the Beelink box after It sleeps. Anyways he's sharing the exact issue, no Internet connectivity via Ethernet cable after his box wakes from sleep mode.

Person's Beelink is GT1 Ultimate (G912) and with GT1_705N0 firmware version. I'm with the same box and firmware version installed and time permitted and I finally tested Internet connectivity via Ethernet cable. I put the box to sleep and woke it back up, no issue. I repeated several times and all is fine.

Therefore, It would be nice to know more details from those with the issue. Like the router box brand, Ethernet cable type and length used.

I do have another G912 box to test out later, and see what comes of that with my experiments.

I'm looking to get to the bottom of this, and have Beelink Officially address this matter.

king555

It was written above that with static IP address setting the ethernet connection is working after wake up OK,
try to adjust the router setting for DHCP Lease Time of IP address, maybe something changes when adjusted

Phant0m``

king555 replied at 2017-11-20 10:08
It was written above that with static IP address setting the ethernet connection is working after wa ...

No problems with my eyes, I've seen and I didn't care. This is an issue with the firmware, and It needs to be addressed natively by Beelink company. Of course I'm not able to reproduce with my own Beelink box, but I'll test with others under Ethernet connection and see if It's common anomaly.

king555

Phant0m, I have no doubt that your eyes are fine, I just wanted to indicate a possible source of problems with ethernet after waking up from sleep mode....

On my GT1 (S912...) it's OK

Phant0m``

king555 replied at 2017-11-21 02:38
Phant0m, I have no doubt that your eyes are fine, I just wanted to indicate a possible source of pro ...

:lol

Yep. Also It shows the person connected, but no Internet Connectivity. :victory:

Compuman

king555 replied at 2017-11-21 14:38
Phant0m, I have no doubt that your eyes are fine, I just wanted to indicate a possible source of pro ...

So I tried to BURN:
old firmware: 111MO -> update to 113MO
the ethernet problem is always here

I tried to BURN:
different firmware: nano version: Nano Nexus
the ethernet problem is always here

I tried to BURN new firmare: 707NO
the ethernet problem is always here


So I think that the problem is HARDWARE and not SOFTWARE...
Maybe only the version with AP6255 wifi ?

izzyoo7

When is this lan issue going to be fixed. We cant go behind tv and disconnect lan plug each time. It's not acceptable to tell us oh unplug it

Opontios

Compuman replied at 2017-12-10 02:06
So I tried to BURN:
old firmware: 111MO -> update to 113MO
the ethernet problem is always here

No. On QCA9377 there is the same problem, but you can always set a static IP. Nobody seams to care about these bugs. The product support is the worst!

Compuman

I always have a static IP
I have the same problem...

Now I return the box...
I tried other box (not beelink):
no one have the ethernet problem, but ... have other problems
;)