Beelink GT1 bricked, please help

raydex79

hi. my box has arrived yesterday and it is bricked allready. i was trying to update firmware with sdcard. after update nothing but black screen. i did try sdcard method, usb update nothing is working. when a checked wifi chipset it is showing the ltm 8830. didn´t find any firmware for this wifi chipset. and nobody is mentioning about it. a will appreciate any advice. Thank U.

king555

Info about LTM8830 chip: "LTM8830 is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. This module design is based on the Qualcomm Atheros QCA9377-3(QCA1023-0) HW chipset. The QCA9377-3(QCA1023-0) is a single-chip wireless local area network (WLAN) and Bluetooth (BT) combo solution..."

raydex79

Thank You for the information. So it means that I have used right firmware for my box. But I dont understand why it has gone black after restart. I contacted beelink service. I´ll see if I get any answer.

KekkoLinkin

I have the same problem.

KekkoLinkin

Pc doesn't find pc in anything method. I have only a white led but recovery doesn't work  

miticofuro

I noticed that beelink support sends the wrong firmware via email, this is the cause of many bricks. That is why OTAs would be useful to be sure
:dizzy::dizzy::dizzy::dizzy:

seandereb

download the USB burning tool install then download your box's firmware , unplug your box disconnect every thing , turn it upside down ,locate the small hole , insert tooth pick , when you here the little button click keep holding insert your male to male USB cable upon connecting to the computer a message in the USB tool will confirm its connected , click start on the app and your firmware should install , also if your box doesn't get detected go into the USB tool location and look for worldcup device ur drivers are there either 64bit or 32bit I added that tip because my PC did not detect when I tryed too flash but yeah try what I said if it successful then great if it is not then I advise return to the seller , hope that helps

minonano

raydex79 replied at 2017-04-28 03:06
Thank You for the information. So it means that I have used right firmware for my box. But I dont un ...

I also have the exact same problem, let us know if you get any info from Bee link.

Magendanz

I've got this same problem with black screen after flashing 311M0 on the unit I received last week, and there won't be any more Android TV builds for GT1 Ultimate until I can find a solution.

miticofuro

Magendanz replied at 2017-05-04 11:15
I've got this same problem with black screen after flashing 311M0 on the unit I received last week,  ...

Incredible! If you can not be a god, worse for us ... :'(