Beelink GT1 bricked, please help

Chomee

I accidentaly posted.  Jerry98vert I will wait a bit before opening, maybe they will replace my gt1 because I bricked it with their firmware and 'help'. Magendanz, I tried that already, no luck...  I read every possible way but nothing worked.  I only didnt short circuit NAND, won't do it yet. Box is as useful as brick now, pc doesn't see it, tv as well.

Chomee

Ok, since Beelink didn't allow my last 2 posts with photos. If someone is interested, I've found out how to resurrect GT1 from the dead. It has eMMC, not NAND, so it wasn't simple to find which pins need to be shortened, but after 2 days I did it. I would post picture, but Beelink moderators are not showing it. If anyone will be in the same situation, pm me. Thanks everyone who tried to help

Frank

so even mine now is briked. I aplied the update for GT1 ultimate via recovery and now the box is unusable. the led is on without any way to turn the box off but unplug the power cord. I unstalled the zip file via recovery by the way...

Chomee

Okay, that's the same what happened to me. Don't worry, get male to male usb cable, open your box and see which wifi module you have. Get Usb burning tool and firmware for your module(mine was 6255). Write me tomorrow on skype (milan7483) I will explain you everything and show picture which 2 pins exactly you need to shorten. It's easier than you think. Cheers'

Frank

Hi Chromee and thanks for your reply. Actually I managed to burn an Adroid firmware I took on Freaktab but it has not wifi..If i try to burn via the USB buring tool the latest 311 firmware nothing happens which is ...incredible! I feel that I need the stock firmware for gt1 ultimate but i cant manage to find it...

Chomee

Well, which box do you have? GT1 or GT1 ultimate? The only difference is RAM and eMMC. Motherboard is the same, so shortening pins should be the same. I flashed GT1_109M0_AP6255 via Usb Burning Tool and everything now works perfect, wifi came back as well. I recommend you to check wifi module first before doing anything else, it is easy to open your box, you can see on youtube video Unboxing and teardown beelink gt1.

Magendanz

I opened a "bricked" Amlogic box just yesterday and revived it by shorting the two DRAM pins.  Took about 20 minutes, and the toughest part was just figuring out which two pins.

Cyprusgrump

Chomee replied at 2017-03-14 06:19
Okay, that's the same what happened to me. Don't worry, get male to male usb cable, open your box an ...

Hi,

I have a box with the same symptoms - can I contact you too please for details of which pins to short?

Chomee

Sure Cyprusgrump

Cyprusgrump

Chomee replied at 2017-03-14 21:10
Sure Cyprusgrump

Thanks!

Have sent you a message and a picture of the board...