Mini MXIII II bricked after flashing custom FW with USB burning tool

Valery02

During startup appears boot logo following by reset (bootloop)
No posibility to flash the device neither with USB cable (don't recognize by PC) nor with micro SD card (don't start from it; checked with different FW and SD cards).
It looks like bootloader is damaged or corrupt.
How can I unbrick the box (shortcut pins etc.)?

khalid

hold reset button.. plug in power ... after 5 to 10 sec..  android logo pop up...  select factory reset

Valery02

No reaction to reset button...
I know about reset button and other way to get device ready to flash- all tries without success.
May be it's hardware problem...
I need info about possibility to short pins at eMMC.
P.S. I have different RK and AMLogic devices and it is the first device what brought problems...

beelink

Valery02 replied at 2017-08-15 05:49
No reaction to reset button...
I know about reset button and other way to get device ready to flash- ...

dear , have you choosen the right firmware for your MINI MXIII II  ? could you offer me more information ? waiting for your reply . :hug:

Valery02

yes, I have flashed custom (not Beelink) firmware for S905x from freaktab.com
I had flashed before two different custom firmwares, what were working.
But I was not really happy and flashed third custom FW to compare...
The flashing process with USB burning tool was successfully according tool status, but it brought to decribed problem- cyclic reset after appearance of bootlogo.