GT1/703 NO / standrad / ultimate edition /(2G+16G/2G+32G/3G+32G)/QCA9377

Phant0m`` · Post time 2017-07-18 13:04:28

beelink replied at 2017-07-17 22:04
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guest ...

Actually that was a very well done-up document. Kudos! :P

andybuzzbee · Post time 2017-07-18 15:01:49

Hi all, I am new to this. How do I update via the USB method. Seeing the box does not have a micro USB, what do I use?

Gia · Post time 2017-07-18 15:10:48

Updated successfully via USB to 703MO. Wiped box as expected unfortunately. First impression is that it is less stable than 702, as screen changes are not as smooth as before.

khalid · Post time 2017-07-18 15:26:33

Gia replied at 2017-07-18 15:10
Updated successfully via USB to 703MO. Wiped box as expected unfortunately. First impression is that ...

still no navigation bar?

Gia · Post time 2017-07-18 16:35:08

No bar but Kodi working quite well on first impression, no dark screen and quite fast via Ethernet.

minonano · Post time 2017-07-18 18:31:37

beelink replied at 2017-07-18 09:56
hello dear , some tips as follows :
1) Format your SD card into FAT32 style ;
2)Copy three files l ...

Beelink
Problem was I could not get to recovery mode. So I installed app "simple reboot" from google store got to recovery and it worked from SD card immediately thanks

pelops · Post time 2017-07-18 18:44:28

beelink replied at 2017-07-18 09:42
dear , try to update the firmware by USB and tell me the result .

How to update via USB'
is there any guideline?

Gia · Post time 2017-07-18 19:12:52

There is a decent enough video on YouTube showing a beelink USB update. The same for all amlogic devices I believe.

Acacius · Post time 2017-07-19 03:55:43

Is this correct: 1. First burn the image file with the amlogic burn software. 2. Put the flash memory in the usb slot. 3. With the update&restore app apply the update. Is this correct?

KeplarQ3 · Post time 2017-07-19 04:12:49

minonano replied at 2017-07-17 22:03
KeplarQ3
How did you update with the SD card?
Reset button then power to recovery or used the update ...

I put the 703NO file on the sd card, booted my Beelink GT1 Ultra, used the update app in the booted system and selected the 703NO file on the SD card. It rebooted and watched the "please wait" circles for about 10 minutes. Then it launched ok.