Sei 12 Pro Max Intel I7 - Wi-fi and Bluetooth adapter doesn't work

Leonid88

After couple of day working after activating this devise, Adapter for wi-fi and BT has stoped working and appearing in Divise Manager. How to fix it? Ethernet connection is working correctly. Thanks.

Support-03

Hello there,
Here are some potential solutions:
1.Please clear the CMOS. Please turn off the PC , unplug the power supply, and put the pin in the pinhole and press it for about 10 seconds , restart the PC after ten minutes. Here is the tutorial [https://mega.nz/file/XypwTISY#DV ... Z7f7qpKGP2E3nMHW8ms]
2. Make sure that the distance between the PC and the router is less than 6 meters.
3. Please uninstall the wifi driver and then resatart the PC to see if it works.
4. Please right click the windows ---setting -troubleshooting ---other toubleshooters--- internet---run , let the PC diagnose the problem and solve it automatically.
5.Please update the driver.  Here is the driver source :https://url.bee-link.cn/8hRr
6. Go to device manager , click the property of the Intel WiFi driver ---advanced--choose property 802 ax, value also choose 802 ax.  

7.  Please make sure your WIFI signal is full.

8.Please right click the windows--computer management--double click Services--①Wlan  auto config--start the service, ②WWAN Auto config ---start the service.

9.Please go to the windows terminal (admin) >  type in : sfc /scannow > then wait until finished.   

10.Please try this software  [https://mega.nz/file/X7hGVZwb#1t ... IEUByAVZoOnzhSf4-Pg](https://mega.nz/file/X7hGVZwb#1t ... IEUByAVZoOnzhSf4-Pg) or [https://url.bee-link.cn/meE5](https://url.bee-link.cn/meE5)

10. Right click windows --go to settings---network & internet----Advanced network settings--network reset--reset now

Leonid88

I tried almost everything from this list of solutions, after "Cold reset" wi-fi and BT adapter became visible. It works now. Thanks.